Network Performance Monitor

Unable to add HPE Synergy 12000 as an SNMP Orion Node

SNMP test fails when adding a HPE Synergy 12000 Device as an Orion Node

First published date

1/25/2021 4:03 PM

Last published date

1/25/2021 4:03 PM

Overview

When Adding an Orion Node HPE SY 480 Gen10. via SNMP
SNMP test Fails on Orion web Console
The Devcie fails to respond to SNMP request from orion, Usng SNMP v1, V2 and V3 when using the SNMP walk tool.

Product section

Network Performance Monitor

Cause

HPE Synergy 12000 Blade model does not support the required OIDs, required by Orion to add a Device via SNMP

1.3.6.1.2.1.1.1 sysdescr
1.3.6.1.2.1.1.2 sysobjectid
1.3.6.1.2.1.1.3 sysuptime

Resolution

Device issue, please contact the vendor and check if there is a firmware update that will allow you to poll the required OIDs.

Disclaimer: Please note, any content posted herein is provided as a suggestion or recommendation to you for your internal use. This is not part of the SolarWinds software or documentation that you purchased from SolarWinds, and the information set forth herein may come from third parties. Your organization should internally review and assess to what extent, if any, such custom scripts or recommendations will be incorporated into your environment. You elect to use third-party content at your own risk, and you will be solely responsible for the incorporation of the same if any.