Tools

ALLO FTP command

The ALLO command may be sent to a server that requires the necessary space for an uploaded to be reserved before the transfer takes place. The argument shall be a decimal integer representing the number of bytes (using the logical byte size) of storage to be reserved for the file. A server that does not require space to be reserved in advance should treat the command as a NOOP operation.

First published date

10/25/2018 8:20 PM

Last published date

10/25/2018 8:20 PM

Overview

This article explains the use of the Allocate (ALLO) FTP command.

Product section

Serv-U Managed File Transfer & Serv-U FTP Server

Resolution

The ALLO command may be sent to a server that requires the necessary space for an uploaded to be reserved before the transfer takes place. The argument shall be a decimal integer representing the number of bytes (using the logical byte size) of storage to be reserved for the file. A server that does not require space to be reserved in advance should treat the command as a NOOP operation.

Common responses

Disclaimer: Please note, any content posted herein is provided as a suggestion or recommendation to you for your internal use. This is not part of the SolarWinds software or documentation that you purchased from SolarWinds, and the information set forth herein may come from third parties. Your organization should internally review and assess to what extent, if any, such custom scripts or recommendations will be incorporated into your environment. You elect to use third-party content at your own risk, and you will be solely responsible for the incorporation of the same if any.