Network Management
What object IDs (OIDs) does NPM poll for interface information
By default, Orion NPM polls the following interface-related OIDs, as listed by type. This information can be useful when troubleshooting issues where interfaces are either not being displayed, or not providing the requested information in SolarWinds Network Performance Monitor (NPM).
First published date
Last published date
Overview
Product section
Resolution
| INFORMATION TYPE | OID NAME | OID VALUE |
|---|---|---|
| Bandwidth - 32-bit Counter | ifInOctets | 1.3.6.1.2.1.2.2.1.10 |
| Bandwidth - 32-bit Counter | ifInUcastPkts | 1.3.6.1.2.1.2.2.1.11 |
| Bandwidth - 32-bit Counter | ifInNUcastPkts | 1.3.6.1.2.1.2.2.1.12 |
| Bandwidth - 32-bit Counter | ifOutOctets | 1.3.6.1.2.1.2.2.1.16 |
| Bandwidth - 32-bit Counter | ifOutUcastPkts | 1.3.6.1.2.1.2.2.1.17 |
| Bandwidth - 32-bit Counter | ifOutNUcastPkts | 1.3.6.1.2.1.2.2.1.18 |
| Bandwidth - 64-bit Counter | ifHCInOctets | 1.3.6.1.2.1.31.1.1.1.6 |
| Bandwidth - 64-bit Counter | ifHCInUcastPkts | 1.3.6.1.2.1.31.1.1.1.7 |
| Bandwidth - 64-bit Counter | ifHCInMulticastPkts | 1.3.6.1.2.1.31.1.1.1.8 |
| Bandwidth - 64-bit Counter | ifHCOutOctets | 1.3.6.1.2.1.31.1.1.1.10 |
| Bandwidth - 64-bit Counter | ifHCOutUcastPkts | 1.3.6.1.2.1.31.1.1.1.11 |
| Bandwidth - 64-bit Counter | ifHCOutMulticastPkts | 1.3.6.1.2.1.31.1.1.1.12 |
| Errors and Discards | ifInDiscards | 1.3.6.1.2.1.2.2.1.13 |
| Errors and Discards | ifInErrors | 1.3.6.1.2.1.2.2.1.14 |
| Errors and Discards | ifOutDiscards | 1.3.6.1.2.1.2.2.1.19 |
| Errors and Discards | ifOutErrors | 1.3.6.1.2.1.2.2.1.20 |
| Interface - General | ifIndex |
1.3.6.1.2.1.2.2.1.1 |
| Interface - General | ifDesc |
1.3.6.1.2.1.2.2.1.2 |
| Interface - General | ifSpeed |
1.3.6.1.2.1.2.2.1.5 |
| Interface - General | ifAdminStatus |
1.3.6.1.2.1.2.2.1.7 |
| Interface - General | ifOperStatus |
1.3.6.1.2.1.2.2.1.8 |
| Interface - General | ifName | 1.3.6.1.2.1.31.1.1.1.1 |
|
Interface - General | ifAlias | 1.3.6.1.2.1.31.1.1.1.18 |
| Signal-to-Noise Ratio and Codeword Errors (CMTS only) | docsIfSigQUnerroreds | 1.3.6.1.2.1.10.127.1.1.4.1.2 |
| Signal-to-Noise Ratio and Codeword Errors (CMTS only) | docsIfSigQCorrecteds | 1.3.6.1.2.1.10.127.1.1.4.1.3 |
| Signal-to-Noise Ratio and Codeword Errors (CMTS only) | docsIfSigQUncorrectables | 1.3.6.1.2.1.10.127.1.1.4.1.4 |
| Signal-to-Noise Ratio and Codeword Errors (CMTS only) | docsIfSigQSignalNoise | 1.3.6.1.2.1.10.127.1.1.4.1.5 |