Network Management

VNQM - CLI commands used to poll PRI trunk utilization

This article provides details about what CLI commands are used to poll PRI trunk utilization in VoIP and Network Quality Manager (VNQM).

First published date

11/2/2018 12:18 PM

Last published date

2/19/2020 9:34 AM

Overview

A list of commands shown below are used for VNQM to poll information for PRI Trunk Utilization.

Product section

VoIP & Network Quality Manager

Resolution

The following commands are used to poll PRI trunk utilization:

show isdn service
Used to find out trunk port names and number of channels.
show call active ?
Used to find out list of available options for the command.
show call active <voice|video|fax...> brief
Used to get the list of active calls. All connections, identified by their LEG IDs, reported using voice option will be marked as voice. All other connections reported using different options will be marked as data, in case they were not previously marked as voice already.

Disclaimer: Please note, any content posted herein is provided as a suggestion or recommendation to you for your internal use. This is not part of the SolarWinds software or documentation that you purchased from SolarWinds, and the information set forth herein may come from third parties. Your organization should internally review and assess to what extent, if any, such custom scripts or recommendations will be incorporated into your environment. You elect to use third-party content at your own risk, and you will be solely responsible for the incorporation of the same if any.