Network Management

UDT poll ARP table of Nexus and Palo Alto devices via CLI

Information on UDT polling of the ARP table in Nexus and Palo Alto devices via CLI.

First published date

4/23/2019 9:53 PM

Last published date

2/16/2022 11:16 PM

Overview

UDT polls Layer 2 and Layer 3 data via SNMP. Now it is possible to poll this data for Palo Alto and Cisco Nexus devices via CLI.

Product section

User Device Tracker

Resolution

Enable Password: (Optional field - Palo Alto switches does not support 'Enable mode' commands)
Polling Layer3 data for Palo Alto device, that does not have enabled CLI polling, will be disabled after first polling
Palo Alto device has an option to accept Authorization Statement. If the option is turn on, user need to turn Use Keyboard Interactive Authentication to 'Yes' on Enable CLI Polling fields. Otherwise, access will be denied.

Enable CLI polling field

Disclaimer: Please note, any content posted herein is provided as a suggestion or recommendation to you for your internal use. This is not part of the SolarWinds software or documentation that you purchased from SolarWinds, and the information set forth herein may come from third parties. Your organization should internally review and assess to what extent, if any, such custom scripts or recommendations will be incorporated into your environment. You elect to use third-party content at your own risk, and you will be solely responsible for the incorporation of the same if any.