Network Management

Site-to-Site VPN tunnels with dynamic peer IPs are missing in the Orion Web Console

When you monitor site-to-site VPN tunnels on a Cisco Adaptive Security Appliance (ASA), the tunnels with static peer IPs display but tunnels with dynamic peer IPs are missing.

First published date

5/14/2019 7:31 PM

Last published date

7/14/2022 6:46 PM

Overview

This article describes how the Orion Platform collects site-to-site VPN tunnel information to understand this behavior.

Product section

Network Performance Monitor

Cause

The missing site-to-site VPN tunnel in the Orion Web Console is also missing in the device CLI and SNMPwalk (SolarWinds SNMP Walk tool) under 1.3.6.1.4.1.9.9.392.

Resolution

Network Performance Monitor (NPM) collects site-to-site VPN tunnel information using CISCO-REMOTE-ACCESS-MONITOR-MIB (1.3.6.1.4.1.9.9.392) and the following CLI commands: (© 2018 ByteSphere, available at http://www.oidview.com, obtained on December 14, 2018)

show run interface
show firewall
show asp drop flow
show mode
show context
show failover state
show version | include Serial
show running-config crypto map
show module
show failover
show clock

Contact your device manufacturer to ensure that data about the Site-to-Site VPN tunnels with dynamic peer IPs is available on SNMP and CLI.

Disclaimer: Please note, any content posted herein is provided as a suggestion or recommendation to you for your internal use. This is not part of the SolarWinds software or documentation that you purchased from SolarWinds, and the information set forth herein may come from third parties. Your organization should internally review and assess to what extent, if any, such custom scripts or recommendations will be incorporated into your environment. You elect to use third-party content at your own risk, and you will be solely responsible for the incorporation of the same if any.