Tools

Send commands to device configuration with CatTools

This article describes how to send commands to your device configuration with Kiwi CatTools.

First published date

10/17/2018 9:25 PM

Last published date

10/17/2018 9:25 PM

Overview

This article describes how to send CLI commands to your device configuration with Kiwi CatTools.

Product section

Kiwi CatTools

Resolution

Open the Kiwi CatTools Console.
In the Activities panel, click Add.
When the activity opens, select Device CLI Send commands from the drop-down menu.
Name the new activity, and check and confirm the data on the page.
Go to the Time tab and set the schedule times and dates as required.
In the Devices tab, select the device that you want to run the activity on.
In E-mail tab, check and change the reporting data as required.
Go to the Options tab, and enter the commands that you want to send to the device.
Click OK.

Disclaimer: Please note, any content posted herein is provided as a suggestion or recommendation to you for your internal use. This is not part of the SolarWinds software or documentation that you purchased from SolarWinds, and the information set forth herein may come from third parties. Your organization should internally review and assess to what extent, if any, such custom scripts or recommendations will be incorporated into your environment. You elect to use third-party content at your own risk, and you will be solely responsible for the incorporation of the same if any.