Applications Systems

SRM: Enable an IBM FlashSystem (REST API) array

This article provides information on enabling the IBM FlashSystem (REST API) of storage arrays so they can be monitored with SolarWinds Storage Resource Monitor (SRM). Monitoring is performed through a RESTful on-board API.

First published date

10/16/2025 7:53 PM

Last published date

12/8/2025 2:06 PM

Overview

This topic provides information on enabling the IBM FlashSystem (REST API) of storage arrays so they can be monitored with SolarWinds Storage Resource Monitor (SRM). Monitoring is performed through a RESTful on-board API.

It should be used in conjunction with the Add your storage array for monitoring with SRM topic in the Success Center documentation or online help.

For further information see the documentation that came with your IBM FlashSystem array, visit the IBM FlashSystem support site or contact your vendor.

Product section

Storage Resource Monitor

Resolution

Environment: SRM 2025.4

This array requires firmware version 8.7.0 or later.

Credentials required to add the array: IP address or hostname for the array

Ensure you have the following information before adding the provider to SRM:

IP address or hostname for the array
Credential name
Array API username
Array API Password
Protocol. The default is HTTPS
API port. The default is 7443.

Disclaimer: Please note, any content posted herein is provided as a suggestion or recommendation to you for your internal use. This is not part of the SolarWinds software or documentation that you purchased from SolarWinds, and the information set forth herein may come from third parties. Your organization should internally review and assess to what extent, if any, such custom scripts, or recommendations will be incorporated into your environment. You elect to use third party content at your own risk, and you will be solely responsible for the incorporation of the same if any.

Disclaimer: Please note, any content posted herein is provided as a suggestion or recommendation to you for your internal use. This is not part of the SolarWinds software or documentation that you purchased from SolarWinds, and the information set forth herein may come from third parties. Your organization should internally review and assess to what extent, if any, such custom scripts or recommendations will be incorporated into your environment. You elect to use third-party content at your own risk, and you will be solely responsible for the incorporation of the same if any.