Applications Systems

SRM: Enable an EMC Xtremio array

This articles provides information about addding a EMC XtremIO array to SRM. XtremIO arrays use a RESTful API on the XtremIO Management Server (XMS) to expose data to SRM and does not require configuring or enabling.

First published date

11/29/2018 10:56 PM

Last published date

11/11/2021 12:50 PM

Overview

This articles provides information about addding a EMC XtremIO array to SRM. It should be used in conjunction with the Add your storage array for monitoring with SRM topic in the Success Center documentation, or online help.

XtremIO arrays use a RESTful API on the XtremIO Management Server (XMS) to expose data to SRM and does not require configuring or enabling.

For more information, please consult the documentation supplied with your array, visit Dell Support (© 2019 Dell, available at https://www.dell.com, obtained on June 19, 2019),  or contact your vendor.

 

Product section

Storage Resource Monitor

Resolution

Credentials required to add the array 

Ensure you have the following information before adding the provider to SRM:

  • IP address or hostname for the array
  • XMS username. The default is xmsadmin
  • XMS password. The default is Xtrem10 (v2.4 and above) or 123456 (earlier versions)
  • Protocol. The default is HTTPS
  • HTTP port. The default is 80
  • HTTPS port. The default is 443
 

Disclaimer: Please note, any content posted herein is provided as a suggestion or recommendation to you for your internal use. This is not part of the SolarWinds software or documentation that you purchased from SolarWinds, and the information set forth herein may come from third parties. Your organization should internally review and assess to what extent, if any, such custom scripts or recommendations will be incorporated into your environment.  You elect to use third party content at your own risk, and you will be solely responsible for the incorporation of the same, if any.