Applications Systems

SRM: Enable a NetApp FAS/AFF (ONTAP REST API) array

This article provides information for adding your NetApp FAS/AFF array to SRM. The NetApp arrays are monitored through the ONTAP REST API on the ONTAP System Manager

First published date

4/18/2023 1:03 PM

Last published date

6/26/2023 7:07 PM

Overview

This article provides information on enabling your NetApp FAS/AFF (ONTAP REST API) array to SRM. It should be used in conjunction with the add your storage array for monitoring with SRM topic in the Success Center documentation , and NetApp documentation at NetApp Support (© 2023 NetApp, available at https://mysupport.netapp.com/, obtained on 2023), or online help.

NetApp FAS/AFF arrays are cluster mode storage arrays. These are monitored directly through the on-board ONTAP REST APIs on the array.

NetApp ONTAP login credentials typically need read-only permissions.

Product section

Storage Resource Monitor

Resolution

Supported firmware:

ONTAP OS 9.11.1 or later

Credentials required to add the array
Ensure you have the following information:

IP address or hostname for the array
Array username
Array password
Protocol. The default is HTTPS.

Disclaimer
Please note, any content posted herein is provided as a suggestion or recommendation to you for your internal use. This is not part of the SolarWinds software or documentation that you purchased from SolarWinds, and the information set forth herein may come from third parties. Your organization should internally review and assess to what extent, if any, such custom scripts or recommendations will be incorporated into your environment. You elect to use third party content at your own risk, and you will be solely responsible for the incorporation of the same, if any.

Disclaimer: Please note, any content posted herein is provided as a suggestion or recommendation to you for your internal use. This is not part of the SolarWinds software or documentation that you purchased from SolarWinds, and the information set forth herein may come from third parties. Your organization should internally review and assess to what extent, if any, such custom scripts or recommendations will be incorporated into your environment. You elect to use third-party content at your own risk, and you will be solely responsible for the incorporation of the same if any.