Applications Systems

SRM: Enable a Dell EqualLogic PS Series array

The article contains information on enabling Dell EqualLogic PS Series arrays so they can be monitored by SRM. The array communicates using embedded SNMP on the array, and does not require enabling.

First published date

10/18/2018 5:25 PM

Last published date

8/26/2025 3:41 PM

Overview

The article contains information on enabling Dell EqualLogic PS Series arrays so they can be monitored by SRM. It should be used in conjunction with the Add your storage array for monitoring with SRM topic in the Success Center documentation.

The array communicates using embedded SNMP on the array, and does not require enabling.

For more information, please consult the documentation supplied with your array, or visit the Dell support site at http://www.dell.com/support 

Product section

Storage Resource Monitor

Resolution

Credentials required for adding array 

Ensure you have the following:

  • IP address for the array
  • SNMP community string for the array. By default this is public
  • Array SNMP port. By default this is 161