Network Management

Pull call statistics from gateways

This article describes which commands to use if you want to pull call statistics from the gateways in VoIP and Network Quality Manager (VNQM).

First published date

10/22/2018 8:30 PM

Last published date

10/22/2018 8:30 PM

Overview

This article describes which commands to use if you want to pull call statistics from the gateways in VoIP and Network Quality Manager (VNQM).

Product section

VoIP & Network Quality Manager

Resolution

To pull call statistics, use the following command set:

show isdn service: use this command to find out trunk port names and the number of channels.
show call active <voice|video|fax...> brief: use this command to get a list of active calls. All connections, identified by their LEG IDs, reported as using the "voice" option will be marked as voice. All other connections reported using different options will be marked as data if they were not previously marked as voice already.

Note: You can use the show call active ? command to find out the list of available options for this command.

Disclaimer: Please note, any content posted herein is provided as a suggestion or recommendation to you for your internal use. This is not part of the SolarWinds software or documentation that you purchased from SolarWinds, and the information set forth herein may come from third parties. Your organization should internally review and assess to what extent, if any, such custom scripts or recommendations will be incorporated into your environment. You elect to use third-party content at your own risk, and you will be solely responsible for the incorporation of the same if any.