Network Management

Object IDs and information Orion Platform polls

Listing of Object IDs and information Orion Platform polls

First published date

10/12/2018 9:11 PM

Last published date

2/9/2022 7:52 PM

Overview

By default, SolarWinds Orion polls the following topology-related OIDs, as listed by type.
Note: All data is gathered on the rediscovery interval. The IP address information is gathered from all nodes.

Product section

Orion Platform

Cause

Resolution

Poller Type Name	OID Name	OID Value
	Description
N.Topology.Snmp.Layer2	dot1dTpFdbTable	1.3.6.1.2.1.17.4.3
	A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame.
N.Topology.Snmp.Layer2	dot1dBasePortTable	1.3.6.1.2.1.17.1.4
	A table that contains generic information about every port that is associated with this bridge. Transparent, source-route, and srt ports are included.
N.Topology.Snmp.Layer2	dot1qVlanCurrentTable	1.3.6.1.2.1.17.7.1.4.2
	A table containing current configuration information for each VLAN currently configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received.
N.Topology.Snmp.Layer2	vmMembershipSummaryTable	1.3.6.1.4.1.9.9.68.1.2.1
	A summary of VLAN membership of non-trunk bridge ports. This is a convenience table for retrieving VLAN membership information. A row is created for a VLAN if: the VLAN exists, or a port is assigned to a non-existent VLAN. VLAN membership can only be modified via the vmMembershipTable.
N.Topology.Snmp.Layer3	ipNetToMediaTable	1.3.6.1.2.1.4.22
	The IPv4 Address Translation table used for mapping from IPv4 addresses to physical addresses. This table has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by the ipNetToPhysicalTable.
N.Topology_CDP.SNMP.cdpCacheTable	cdpCacheAddressType cdpCacheAddress cdpCacheDeviceId cdpCacheDevicePort	1.3.6.1.4.1.9.9.23.1.2.1.1.3 1.3.6.1.4.1.9.9.23.1.2.1.1.4 1.3.6.1.4.1.9.9.23.1.2.1.1.6 1.3.6.1.4.1.9.9.23.1.2.1.1.7
	L2 entries gathering for CISCO-CDP-MIB
N.Topology_Layer2.SNMP.Dot1dTpFdb	dot1dTpFdbPort dot1dTpFdbAddress dot1dTpFdbStatus	1.3.6.1.2.1.17.4.3.1.2 1.3.6.1.2.1.17.4.3.1.1 1.3.6.1.2.1.17.4.3.1.3
	L2 entries gathering for BRIDGE-MIB (community string indexing)
N.Topology_Layer2.SNMP.Dot1dTpFdbNoVLANs	dot1dTpFdbPort dot1dTpFdbAddress dot1dTpFdbStatus	1.3.6.1.2.1.17.4.3.1.2 1.3.6.1.2.1.17.4.3.1.1 1.3.6.1.2.1.17.4.3.1.3
	L2 entries gathering for BRIDGE-MIB
N.Topology_Layer2.SNMP.Dot1qTpFdb	dot1qTpFdbPort dot1qTpFdbAddress dot1qTpFdbStatus	1.3.6.1.2.1.17.7.1.2.2.1.2 1.3.6.1.2.1.17.7.1.2.2.1.1 1.3.6.1.2.1.17.7.1.2.2.1.3
	L2 entries gathering for Q-BRIDGE-MIB (community string indexing)
N.Topology_Layer2.SNMP.Dot1qTpFdbNoVLANs	dot1qTpFdbPort dot1qTpFdbAddress dot1qTpFdbStatus	1.3.6.1.2.1.17.7.1.2.2.1.2 1.3.6.1.2.1.17.7.1.2.2.1.1 1.3.6.1.2.1.17.7.1.2.2.1.3
	L2 entries gathering for Q-BRIDGE-MIB
N.Topology_Layer3.SNMP.ipNetToMedia	ipNetToMediaIfIndex ipNetToMediaPhysAddress ipNetToMediaType	1.3.6.1.2.1.4.22.1.1 1.3.6.1.2.1.4.22.1.3 1.3.6.1.2.1.4.22.1.4
	Layer3 poller for devices which supports IP-MIB
N.Topology_LLDP.SNMP.lldpRemoteSystemsData	lldpRemManAddrIfSubtype lldpRemManAddrIfId lldpRemPortId lldpRemPortDesc lldpRemSysName lldpRemChassisId	1.0.8802.1.1.2.1.4.2.1.3 1.0.8802.1.1.2.1.4.2.1.4 1.0.8802.1.1.2.1.4.1.1.7 1.0.8802.1.1.2.1.4.1.1.8 1.0.8802.1.1.2.1.4.1.1.9 1.0.8802.1.1.2.1.4.1.1.5
	Topology poller for L2 entries gathering for devices which support LLDP-MIB
N.Topology_PortsMap.SNMP.Dot1dBase	dot1dBasePort dot1dBasePortIfIndex	1.3.6.1.2.1.17.1.4.1.1 1.3.6.1.2.1.17.1.4.1.2
	BRIDGE-MIB with community string indexing
N.Topology_PortsMap.SNMP.Dot1dBaseNoVLANs	dot1dBasePort dot1dBasePortIfIndex	1.3.6.1.2.1.17.1.4.1.1 1.3.6.1.2.1.17.1.4.1.2
	PortID to IfIndex map gathering for BRIDGE-MIB
N.Topology_Vlans.SNMP.Dot1q	dot1qVlanIndex	1.3.6.1.2.1.17.7.1.4.2.1.2
	Q-BRIDGE-MIB
N.Topology_Vlans.SNMP.VmMembershipSummary	vmMembershipSummaryTable	1.3.6.1.4.1.9.9.68.1.2.1
	CISCO-VLAN-MEMBERSHIP-MIB
N.Topology_Vlans.SNMP.VtpVlan	vtpVlanTable	1.3.6.1.4.1.9.9.46.1.3.1
	CISCO-VTP-MIB
N.IPAddress.ICMP.Generic Node.IPAddresses.ICMPIPAddressesPoller	N/A	N/A
	Performs reverse/forward DNS lookup to gather IP addresses for ICMP nodes
N.IPAddress.SNMP.Generic Node.IPAddresses.SNMPIPAddressesPoller	ipAdEntAddr	1.3.6.1.2.1.4.20.1.1
	The IPv4 address to which this entry's addressing information pertains. Performs reverse/forward DNS lookup to gather IP addresses
N.IPAddress.SNMP.Generic Node.IPAddresses.SNMPIPAddressesPoller	ipv6AddrAddress	1.3.6.1.2.1.55.1.8.1.1
	Performs reverse/forward DNS lookup to gather IPv6 addresses
N.IPAddress.WMI.Generic Node.IPAddresses.WmiIPAddressesPoller	N/A	N/A
	IP addresses poller for WMI devices Generic poller for Windows 2000 or newer. Performs reverse/forward DNS lookup to gather IP addresses. The following WMI query is used: SELECT IPAddress FROM Win32_NetworkAdapterConfiguration WHERE IPEnabled = 'TRUE'
N.Details.SNMP.Generic Node.SNMP.NodeDetailsPoller	multiple	multiple
	Node details poller for devices which support RFC1213-MIB and IF-MIB utilized in node rediscovery Poller utilizes GET-REQUEST to gather basic details about node using OIDs: sysObjectID = 1.3.6.1.2.1.1.2.0 sysDescription = 1.3.6.1.2.1.1.1.0 sysName = 1.3.6.1.2.1.1.5.0 sysLocation = 1.3.6.1.2.1.1.6.0 sysContact = 1.3.6.1.2.1.1.4.0 Poller is able to recover if some of OIDs mentioned above are missing. OID sysObjectID is the only one that is required. Poller utilizes GetSubtree request to gather all MAC addresses from device using OID: interfacesMAC = 1.3.6.1.2.1.2.2.1.6
N.Topology_STP.SNMP.Dot1dStp	dot1dBaseBridgeAddress Dot1DStpPriority Dot1DStpPort Dot1DStpPortState Dot1DStpPortEnable Dot1DStpPortDesignedRoot Dot1DStpPortDesignedBridge Dot1DStpPortDesignedPort	1.3.6.1.2.1.17.1.1 1.3.6.1.2.1.17.2.2 1.3.6.1.2.1.17.2.15.1.1 1.3.6.1.2.1.17.2.15.1.3 1.3.6.1.2.1.17.2.15.1.4 1.3.6.1.2.1.17.2.15.1.6 1.3.6.1.2.1.17.2.15.1.8 1.3.6.1.2.1.17.2.15.1.9
	Poller for STP (Spanning Tree Protocol) entries. Poller utilizes GetTable request to gather Bridge Id, Port Number, Port State, enabled/disabled status of the port, port's designated root, bridge, and port using OIDs.
N.Topology_Layer3_IpRouting.SNMP.ipCidrRouter	ipCidrRouteDest ipCidrRouteIfIndex ipCidrRouteNextHop ipCidrRouteType ipCidrRouteMask	1.3.6.1.2.1.4.24.4.1.1 1.3.6.1.2.1.4.24.4.1.5 1.3.6.1.2.1.4.24.4.1.4 1.3.6.1.2.1.4.24.4.1.6 1.3.6.1.2.1.4.24.4.1.2
	Poller utilizes GetTable request to gather ipCidrRouteDest, ipCidrRouteIfIndex, ipCidrRouteNextHop, ipCidrRouteType and ipCidrRouteMask using OID
N.Topology_Layer3_IpRouting.SNMP.ipForwardRouter	IpForwardDest IpForwardIfIndex IpForwardNextHop IpForwardType IpForwardMask	1.3.6.1.2.1.4.24.2.1.1 1.3.6.1.2.1.4.24.2.1.5 1.3.6.1.2.1.4.24.2.1.4 1.3.6.1.2.1.4.24.2.1.6 1.3.6.1.2.1.4.24.2.1.2
	Poller for L3 IPForward entries. Poller utilizes GetTable request to gather IpForwardDest, IpForwardIfIndex, IpForwardNextHop, IpForwardType and IpForwardMask using OIDs.

Disclaimer: Please note, any content posted herein is provided as a suggestion or recommendation to you for your internal use. This is not part of the SolarWinds software or documentation that you purchased from SolarWinds, and the information set forth herein may come from third parties. Your organization should internally review and assess to what extent, if any, such custom scripts or recommendations will be incorporated into your environment. You elect to use third-party content at your own risk, and you will be solely responsible for the incorporation of the same if any.