Network Management

OIDs polled for EIGRP

Data polled from EIGRP enabled devices with the corresponding OIDs

First published date

11/9/2018 10:22 PM

Last published date

12/19/2025 3:48 PM

Overview

This article documents the OIDs supported to poll EIGRP Neighbor data.

Product section

Network Performance Monitor

Resolution

EIGRP was originally a proprietary Cisco routing protocol, only available on Cisco routers. Although it became an open protocol in 2013, our EIGRP support is focusing on Cisco devices and only uses Cisco EIGRP MIBs.

If the device responds to 1.3.6.1.4.1.9.9.449.1.4, this poller is supported. The peer protocol status is always "Established" because cEigrpPeer table only stores established peers.

NPM polls the following OIDs:

OID	Name	TableColumn
1.3.6.1.4.1.9.9.449.1.4.1.1.3	cEigrpPeerAddr	NeighborIdentifier
1.3.6.1.4.1.9.9.449.1.4.1.1.2	cEigrpPeerAddrType	IP_address_Type, IP_version
1.3.6.1.4.1.9.9.449.1.4.1.1.3	cEigrpPeerAddr	NeighborIP, NeighborIPGUID
1.3.6.1.4.1.9.9.449.1.4.1.1.4	cEigrpPeerIfIndex	LocalProtocolInterfaceIndex

Disclaimer: Please note, any content posted herein is provided as a suggestion or recommendation to you for your internal use. This is not part of the SolarWinds software or documentation that you purchased from SolarWinds, and the information set forth herein may come from third parties. Your organization should internally review and assess to what extent, if any, such custom scripts or recommendations will be incorporated into your environment. You elect to use third-party content at your own risk, and you will be solely responsible for the incorporation of the same if any.