Network Management
NCM Template - H3C S3100-26TP-EI Ethernet Switches (1.3.6.1.4.1.25506.1.246)
The template to be used in NCM for adding the H3C S3100-26TP-EI Ethernet switches is described.
First published date
10/9/2018 6:20 PM
Last published date
10/9/2018 6:21 PM
Overview
This article provides a NCM Device Command Templates to be used with H3C S3100-26TP-EI Ethernet Switches (1.3.6.1.4.1.25506.1.246).
Product section
Network Configuration Manager
Resolution
Depending on your version of NCM, use relevant steps to add template, as described in Creating and Modifying Device Templates in the NCM Administrator Guide .
Use the following template:
01 <Configuration-Management Device="H3C S3100-26TP-EI"SystemOID="1.3.6.1.4.1.25506.1.246">
02 <Commands>
03 <Command Name="ALLOCATEPTY" Value="False" />
04 <Command Name="ENABLEIDENTIFIER" Value=">" />
05 <Command Name="ENABLECOMMAND" Value="super 3" />
06 <Command Name="MENUBASED" Value="False" />
07 <Command Name="RESET" Value="${CRLF}" />
08 <Command Name="REBOOT" Value="reload${CRLF}y${CRLF}y" />
09 <Command Name="EnterConfigMode" Value="system-view" />
10 <Command Name="ExitConfigMode" Value="return" />
11 <Command Name="Startup" Value="saved-configuration" />
12 <Command Name="Running" Value="current-configuration" />
13 <Command Name="EraseConfig" Value="write erase${CRLF}Y" />
14 <Command Name="SaveConfig" Value="save${CRLF}y${CRLF}${CRLF}y${CRLF}" />
15 <Command Name="VERSION" Value="display version" />
16 <Command Name="DownloadConfig" Value="display ${ConfigType}"/>
17 <Command Name="UploadConfig"Value="${EnterConfigMode}${CRLF}${ConfigText}${CRLF}${ExitConfigMode}" />
18 <Command Name="DOWNLOADCONFIGINDIRECT" Value="tftp ${StorageAddress} put config.cfg ${StorageFilename}" />
19 </Commands>
20 </Configuration-Management>