Network Management

Limited number of series displayed

This article provides information on when you are unable to add additional data series to the chart and you receive the following message: Limited number of series displayed

First published date

10/19/2018 9:00 PM

Last published date

4/3/2020 4:26 PM

Overview

This article provides information on when you are unable to add additional data series to the chart and you receive the following message:

Limited number of series displayed

This message may also come up when trying to add more interfaces on a custom report.

Product section

Network Performance Monitor

Resolution

By default, Orion only displays 10 series. This number can be increased but will cause a more extended amount of data required and a longer time to process.

To increase the number of series, do the following:

Go to Orion Web Console > Settings > All Settings > Web Console Settings.
Modify the value of the MAXIMUM NUMBER OF DATA SERIES DISPLAYED ON CHART
Click Submit.

* SolarWinds recommends adjusting this setting to no higher than 20.

Disclaimer: Please note, any content posted herein is provided as a suggestion or recommendation to you for your internal use. This is not part of the SolarWinds software or documentation that you purchased from SolarWinds, and the information set forth herein may come from third parties. Your organization should internally review and assess to what extent, if any, such custom scripts or recommendations will be incorporated into your environment. You elect to use third-party content at your own risk, and you will be solely responsible for the incorporation of the same if any.