Network Management

Incorrect interface speed on the Orion Web Console

What to do if the your Orion Platform product is reporting incorrect interface speed. It should be 1 Gb.

First published date

10/11/2018 4:29 PM

Last published date

2/17/2022 6:50 AM

Overview

Your Orion Platform product is reporting an incorrect interface speed. It should be 1 Gb.

Product section

Orion Platform

Cause

Device itself is report low if-speed for subinterfaces see the results below for each interface speed configured under the device OID's
 

if-Name

If-speed

.1.3.6.1.2.1.2.2.1.2.1 = STRING: "lo"

.1.3.6.1.2.1.2.2.1.5.1 = GAUGE32: 10000000

.1.3.6.1.2.1.2.2.1.2.2 = STRING: "eth0"

.1.3.6.1.2.1.2.2.1.5.2 = GAUGE32: 1000000000

.1.3.6.1.2.1.2.2.1.2.3 = STRING: "eth1"

.1.3.6.1.2.1.2.2.1.5.3 = GAUGE32: 1000000000

.1.3.6.1.2.1.2.2.1.2.4 = STRING: "eth2"

.1.3.6.1.2.1.2.2.1.5.4 = GAUGE32: 1000000000

.1.3.6.1.2.1.2.2.1.2.5 = STRING: "eth3"

.1.3.6.1.2.1.2.2.1.5.5 = GAUGE32: 1000000000

.1.3.6.1.2.1.2.2.1.2.6 = STRING: "eth4"

.1.3.6.1.2.1.2.2.1.5.6 = GAUGE32: 1000000000

.1.3.6.1.2.1.2.2.1.2.7 = STRING: "eth5"

.1.3.6.1.2.1.2.2.1.5.7 = GAUGE32: 1000000000

.1.3.6.1.2.1.2.2.1.2.8 = STRING: "eth6"

.1.3.6.1.2.1.2.2.1.5.8 = GAUGE32: 1000000000

.1.3.6.1.2.1.2.2.1.2.9 = STRING: "eth6.580"

.1.3.6.1.2.1.2.2.1.5.9 = GAUGE32: 10000000

.1.3.6.1.2.1.2.2.1.2.10 = STRING: "eth6.581"

.1.3.6.1.2.1.2.2.1.5.10 = GAUGE32: 10000000

.1.3.6.1.2.1.2.2.1.2.11 = STRING: "eth6.582"

.1.3.6.1.2.1.2.2.1.5.11 = GAUGE32: 10000000

.1.3.6.1.2.1.2.2.1.2.12 = STRING: "eth1.313"

.1.3.6.1.2.1.2.2.1.5.12 = GAUGE32: 10000000

.1.3.6.1.2.1.2.2.1.2.13 = STRING: "eth6.583"

.1.3.6.1.2.1.2.2.1.5.13 = GAUGE32: 10000000

.1.3.6.1.2.1.2.2.1.2.14 = STRING: "eth1.314"

.1.3.6.1.2.1.2.2.1.5.14 = GAUGE32: 10000000

.1.3.6.1.2.1.2.2.1.2.15 = STRING: "eth3.386"

.1.3.6.1.2.1.2.2.1.5.15 = GAUGE32: 10000000

.1.3.6.1.2.1.2.2.1.2.16 = STRING: "eth3.387"

.1.3.6.1.2.1.2.2.1.5.16 = GAUGE32: 10000000

.1.3.6.1.2.1.2.2.1.2.17 = STRING: "eth0.30"

.1.3.6.1.2.1.2.2.1.5.17 = GAUGE32: 10000000

.1.3.6.1.2.1.2.2.1.2.18 = STRING: "eth0.40"

.1.3.6.1.2.1.2.2.1.5.18 = GAUGE32: 10000000

.1.3.6.1.2.1.2.2.1.2.19 = STRING: "eth5.570"

.1.3.6.1.2.1.2.2.1.5.19 = GAUGE32: 10000000

.1.3.6.1.2.1.2.2.1.2.20 = STRING: "eth5.571"

.1.3.6.1.2.1.2.2.1.5.20 = GAUGE32: 10000000

.1.3.6.1.2.1.2.2.1.2.21 = STRING: "eth5.572"

.1.3.6.1.2.1.2.2.1.5.21 = GAUGE32: 10000000

.1.3.6.1.2.1.2.2.1.2.22 = STRING: "eth5.573"

.1.3.6.1.2.1.2.2.1.5.22 = GAUGE32: 10000000

.1.3.6.1.2.1.2.2.1.2.23 = STRING: "eth5.574"

.1.3.6.1.2.1.2.2.1.5.23 = GAUGE32: 10000000

.1.3.6.1.2.1.2.2.1.2.24 = STRING: "eth5.575"

.1.3.6.1.2.1.2.2.1.5.24 = GAUGE32: 10000000

.1.3.6.1.2.1.2.2.1.2.25 = STRING: "eth5.576"

.1.3.6.1.2.1.2.2.1.5.25 = GAUGE32: 10000000

.1.3.6.1.2.1.2.2.1.2.26 = STRING: "eth0.10"

.1.3.6.1.2.1.2.2.1.5.26 = GAUGE32: 10000000

.1.3.6.1.2.1.2.2.1.2.27 = STRING: "eth6.577"

.1.3.6.1.2.1.2.2.1.5.27 = GAUGE32: 10000000

.1.3.6.1.2.1.2.2.1.2.28 = STRING: "eth6.578"

.1.3.6.1.2.1.2.2.1.5.28 = GAUGE32: 10000000

.1.3.6.1.2.1.2.2.1.2.29 = STRING: "eth6.579"

.1.3.6.1.2.1.2.2.1.5.29 = GAUGE32: 10000000

.1.3.6.1.2.1.2.2.1.2.30 = STRING: "eth0.20"

.1.3.6.1.2.1.2.2.1.5.30 = GAUGE32: 10000000

.1.3.6.1.2.1.2.2.1.2.31 = STRING: "eth2.384"

.1.3.6.1.2.1.2.2.1.5.31 = GAUGE32: 10000000

.1.3.6.1.2.1.2.2.1.2.32 = STRING: "eth2.385"

.1.3.6.1.2.1.2.2.1.5.32 = GAUGE32: 10000000

Resolution

  1. You can manually change the "Custom Bandwidth" on each interface .
    Go to the interface > Edit Interface > Check "Custom Bandwidth" > set value as required > Submit