Network Management

Example Config - Extreme sFlow Configuration

This article contains a sample configuration to support Extreme devices.

First published date

10/13/2018 10:32 PM

Last published date

10/13/2018 10:32 PM

Overview

This article contains a sample configuration to support Extreme devices.

Product section

Netflow Traffic Analyzer

Resolution

The sFlow collector value must reflect the IP address of your NPM server. This value also contains the port number (2055) that is required in this step.

enable sflow
configure sflow config agent 10.199.5.10
configure sflow collector 192.168.72.67 port 2055
configure sflow sample-rate 128
configure sflow poll-interval 30
configure sflow backoff-threshold 50
enable sflow backoff-threshold
enable sflow ports all

Disclaimer: Please note, any content posted herein is provided as a suggestion or recommendation to you for your internal use. This is not part of the SolarWinds software or documentation that you purchased from SolarWinds, and the information set forth herein may come from third parties. Your organization should internally review and assess to what extent, if any, such custom scripts or recommendations will be incorporated into your environment. You elect to use third-party content at your own risk, and you will be solely responsible for the incorporation of the same if any.