Network Management

Example Config - Brocade (Foundry) sFlow Configuration

This article contains a sample configuration for Brocade (Foundry) sFlow.

First published date

10/13/2018 10:35 PM

Last published date

11/14/2022 12:52 PM

Overview

This article contains a sample configuration for Brocade (Foundry) sFlow.

Product section

Netflow Traffic Analyzer

Resolution

To support Foundry devices, you must configure the device using the following configuration template.

Notes:

Ensure your Foundry device supports sFlow version 5.
The sFlow destination value must reflect the IP address of your NPM server. This value also contains the port number (2055) that is required in this step.

config> int e 1/1 to 4/48
interface> sflow forwarding
config> sflow destination 10.199.1.199 2055
config> sflow sample 128
config> sflow polling-interval 30
config> sflow enable

Disclaimer: Please note, any content posted herein is provided as a suggestion or recommendation to you for your internal use. This is not part of the SolarWinds software or documentation that you purchased from SolarWinds, and the information set forth herein may come from third parties. Your organization should internally review and assess to what extent, if any, such custom scripts or recommendations will be incorporated into your environment. You elect to use third-party content at your own risk, and you will be solely responsible for the incorporation of the same if any.