Network Management

Enable monitoring on unmonitored traffic in NTA

This article describes how to monitor unmonitored traffic in NTA. Enable monitoring. NetFlow Traffic Analyzer.

First published date

10/23/2018 6:51 PM

Last published date

10/23/2018 6:51 PM

Overview

This article describes how to monitor unmonitored traffic in NTA.

Product section

Netflow Traffic Analyzer

Resolution

Go to Settings > NTA Settings > Application and Service Ports.
Enable all monitoring. Note: If an application is disabled for monitoring, then it cannot be monitored.
By default, only ports under 1023 are selected in NetFlow.The Unmonitored Traffic (-1) that is showing in your NTA is traffic where the application has not been defined on the port.
If there are still ports showing as Unmonitored Traffic, check your disabled applications.

Disclaimer: Please note, any content posted herein is provided as a suggestion or recommendation to you for your internal use. This is not part of the SolarWinds software or documentation that you purchased from SolarWinds, and the information set forth herein may come from third parties. Your organization should internally review and assess to what extent, if any, such custom scripts or recommendations will be incorporated into your environment. You elect to use third-party content at your own risk, and you will be solely responsible for the incorporation of the same if any.