Security Compliance

Configure logging on SonicWall Aventail SSL VPN E-Class appliances in SEM

This article provides the procedure for configuring your SonicWall Aventail SSL VPN E-Class appliance to log to your SolarWinds SEM manager.

First published date

10/8/2018 10:36 PM

Last published date

5/30/2019 5:04 PM

Overview

This article applies to Security Event Manager (formerly Log & Event Manager).

This article describes how to configure your SonicWall Aventail SSL VPN E-Class appliance to log to your SolarWinds SEM manager.

Product section

Security Event Manager

Resolution

  1. Log in to your Aventail Management Console.
  2. In the left pane under the Monitoring category, click Logging.
  3. Click the Configure Logging tab.
  4. In the Aventail service log level section, select the following:
    • Web proxy: Verbose
    • Network tunnel: Verbose
    • Management: Debug
  5. In the Syslog configuration section, configure the following fields:
    • x: {The IP address for your LEM Manager}
    • Port: 514
    • Protocol: UDP

      Note: There is no option to set a specific remote syslog facility. The appliance will log to local6 by default.

  6. Click Save.
  7. To commit the settings, click Pending changes in the upper right.