Security Compliance

Configure SEM to connect to Microsoft Exchange

This article describes how to configureSEM to connect to Microsoft Exchange.

First published date

10/19/2018 11:23 PM

Last published date

3/14/2022 7:50 AM

Overview

This article describes how to configure Security Event Manager (formerly Log & Event Manager)
to connect to Microsoft Exchange.

Product section

Security Event Manager

Cause

N/A

Resolution

HTML5 SEM Events Console Flash-based console

  1. In the SEM Events Console, click the Nodes tab.
  2. In the search box on the top right, enter the IP address of your Microsoft Exchange server.
  3. Next to the node, select the check box, and then click Manage node connectors.
  4. In the search box, enter Exchange.
  5. Select a Microsoft Exchange connector, and then click Add Connector.
  6. Complete the connector configuration form, and then click Add.
  7. Continue adding Microsoft Exchange connectors as needed.
  8. Under Configured connectors, select a Microsoft Exchange connector, and then click Start. Repeat for the remaining connectors.


Flash-based SEM console

  1. On the SEM Console toolbar, navigate to Manage > Nodes.
  2. In the search box on the top left, enter the IP address of your Microsoft Exchange server.
  3. Next to the IP address, click the gear icon, and then select Connectors.
  4. In the search box, enter Exchange.
  5. Next to the name of the Microsoft Exchange connectors, click the gear icon, and then select New. 
  6. Click Save.
  7. Next to the name of the connectors, click the gear icon, and then click Start.