Network Management

Compliance reports are not executing automatic remediation script

Compliance Policy Reports are not executing Automatic Remediation Script, this is due to the Approval System being enabled and an extra security option must be implemented under the NCM Security Settings.

First published date

10/10/2018 2:06 PM

Last published date

10/10/2018 2:06 PM

Overview

This article goes over why a compliance policy report does not execute automatic remediation script.

Product section

Network Configuration Manager

Cause

If the Approval System has been setup and enabled, the automatic remediation script will not execute as it needs an account with no approval to complete the script or it must be approved.

Resolution

Go to the NCM settings, click on Security.
Click on the Bypass approval system for automatic remediation of policy violations and then submit:

Disclaimer: Please note, any content posted herein is provided as a suggestion or recommendation to you for your internal use. This is not part of the SolarWinds software or documentation that you purchased from SolarWinds, and the information set forth herein may come from third parties. Your organization should internally review and assess to what extent, if any, such custom scripts or recommendations will be incorporated into your environment. You elect to use third-party content at your own risk, and you will be solely responsible for the incorporation of the same if any.