Network Management

CBQoS OIDs polled by NTA service

This provides information about the OIDs needed for CBQoS to work in NTA.

First published date

10/22/2018 8:37 PM

Last published date

6/26/2023 8:40 AM

Overview

This provides information about the OIDs needed for CBQoS to work in NTA.

Product section

Netflow Traffic Analyzer

Resolution

cbQosIfType	1.3.6.1.4.1.9.9.166.1.1.1.1.2	Type of interface to which this policy is attached
cbQosPolicyDirection	1.3.6.1.4.1.9.9.166.1.1.1.1.3	Direction of traffic to which this policy is applied
cbQosIfIndex	1.3.6.1.4.1.9.9.166.1.1.1.1.4	Interface index to which this policy is attached
cbQosConfigIndex¹	1.3.6.1.4.1.9.9.166.1.5.1.1.2	Configuration index of each object (e.g. class map, policy map, etc).
cbQosObjectsType	1.3.6.1.4.1.9.9.166.1.5.1.1.3	Type of QoS object (e.g. class map, policy map, etc)
cbQosParentObjectsIndex	1.3.6.1.4.1.9.9.166.1.5.1.1.4	Index of parent object. Used to determined objects hierarchy (policy map - class map relation, nested policies).
cbQosPolicyMapName	1.3.6.1.4.1.9.9.166.1.6.1.1.1	Policy map name
cbQosPolicyMapDesc	1.3.6.1.4.1.9.9.166.1.6.1.1.2	Policy map description
cbQosCMName	1.3.6.1.4.1.9.9.166.1.7.1.1.1	Class map names
cbQosCMDesc	1.3.6.1.4.1.9.9.166.1.7.1.1.2	Class map descriptions
cbQosCMInfo	1.3.6.1.4.1.9.9.166.1.7.1.1.3	Class map configuration information
cbQosCMPrePolicyByte64	1.3.6.1.4.1.9.9.166.1.15.1.1.6	Count of bytes befor applying QoS policies for each class
cbQosCMPostPolicyByte64	1.3.6.1.4.1.9.9.166.1.15.1.1.10	Count of bytes after executing QoS policies for each class
cbQosCMDropByte64	1.3.6.1.4.1.9.9.166.1.15.1.1.17	Count of dropped bytes per class
cbQosCMNoBufDropPkt64	1.3.6.1.4.1.9.9.166.1.15.1.1.21	Count of dropped packets
cbQosPoliceCfgRate	1.3.6.1.4.1.9.9.166.1.12.1.1.1	The committed policing rate. This is the sustained rate permitted by policing.	4.1.1+
cbQosPoliceCfgRate64	1.3.6.1.4.1.9.9.166.1.12.1.1.11	The committed policing rate. This is the sustained rate permitted by policing. 64-bit version.	4.1.1+
cbQosPoliceCfgRateType	1.3.6.1.4.1.9.9.166.1.12.1.1.12	The rate type that configured for CIR & PIR (1-bps, 2-percentage, etc).	4.1.1+
cbQosPoliceCfgPercentRateValue	1.3.6.1.4.1.9.9.166.1.12.1.1.13	The committed policing rate in percentage. Its value is valid only when cbQosPoliceCfgRateType equals to 2.	4.1.1+
cbQosTSCfgRate	1.3.6.1.4.1.9.9.166.1.13.1.1.1	The committed traffic-shaping rate. This is the sustained rate permitted by the traffic-shaping.	4.1.1+
cbQosTSCfgRate64	1.3.6.1.4.1.9.9.166.1.13.1.1.11	The committed shape rate. This is the sustained rate permitted by shaping. This object represents the 64 bit value of object cbQosTSCfgRate.	4.1.1+
cbQosTSCfgRateType	1.3.6.1.4.1.9.9.166.1.13.1.1.7	The rate type that configured for traffic-shaping. 1 means rate is configured in bps, 2 means rate is configured in percentage, etc.	4.1.1+
cbQosTSCfgPercentRateValue	1.3.6.1.4.1.9.9.166.1.13.1.1.8	The committed traffic-shaping rate in percentage. Its value is valid only when cbQosTSCfgRateType equals to 2.	4.1.1+
cbQosQueueingCfgBandwidth	1.3.6.1.4.1.9.9.166.1.9.1.1.1	If the cbQosQueueingCfgBandwidthUnits value is 'kbps(1)' or 'percentage(2)', this object represents the configured bandwidth allocated to this traffic class.	4.1.1+
cbQosQueueingCfgBandwidthUnits	1.3.6.1.4.1.9.9.166.1.9.1.1.2	Units of the accompanying cbQosQueueingCfgbandwidth parameter	4.1.1+
cbQosQueueingCfgBandwidth64	1.3.6.1.4.1.9.9.166.1.9.1.1.13	If the cbQosQueueingCfgBandwidthUnits value is 'kbps(1)' or 'percentage(2)', this object represents the configured bandwidth allocated to this traffic class. 64-bit variant of cbQosQueueingCfgBandwidth value.	4.1.1+

¹ - This OID is used by availability job - NTA uses this OID to determine whether the device supports CBQ

Interface Mapping

NetStream (equivalent to NetFlow) / Huawei	hwifNet32BitIndex	1.3.6.1.4.1.2011.5.25.110.1.2.1.2	Mapping table between NetStream interface index and SNMP interface index
NetFlow / Alcatel	vRtrIfGlobalIndexvRtrIfIndex	1.3.6.1.4.1.6527.3.1.2.3.37.1.2	Mapping table between NetFlow interface index and SNMP interface index

Disclaimer: Please note, any content posted herein is provided as a suggestion or recommendation to you for your internal use. This is not part of the SolarWinds software or documentation that you purchased from SolarWinds, and the information set forth herein may come from third parties. Your organization should internally review and assess to what extent, if any, such custom scripts or recommendations will be incorporated into your environment. You elect to use third-party content at your own risk, and you will be solely responsible for the incorporation of the same if any.