Network Management

Adjust, modify, or change a device template used for NCM when the prompt is just a > or #

This article provides information on how to adjust a device template to be used with NCM in cases where the device does not have the host name in the prompt (privilege mode prompt only shows #)

First published date

10/10/2018 1:23 PM

Last published date

10/10/2018 1:23 PM

Overview

This article provides information on the modification needed in a device template to be used with NCM in cases where the device does not have the host name in the prompt (privilege mode prompt only shows #).

Product section

Network Configuration Manager

Resolution

Depending on version of NCM use relevant steps to edit template. Refer to the NCM Admin Guide .

Add the following line (command) to the template:

<Command Name="VirtualEnablePrompt" Value="#"/>

Disclaimer: Please note, any content posted herein is provided as a suggestion or recommendation to you for your internal use. This is not part of the SolarWinds software or documentation that you purchased from SolarWinds, and the information set forth herein may come from third parties. Your organization should internally review and assess to what extent, if any, such custom scripts or recommendations will be incorporated into your environment. You elect to use third-party content at your own risk, and you will be solely responsible for the incorporation of the same if any.