Submit a ticketCall us
Home > Success Center > VoIP & Network Quality Manager (VNQM) > VNQM 4.4 Administrator Guide > Adding IP SLA operations > Adding ICMP Echo IP SLA operations to devices

Adding ICMP Echo IP SLA operations to devices

Table of contents
No headers

Internet Control Message Protocol (ICMP) Echo IP SLA operations measure round trip time between nodes on your network. These operations ensure that your network devices are operational and performing as expected.

  • You may need to configure your device to successfully use ICMP Echo operations. For more information, see Configuring CLI credentials.
  • You cannot add operations that have been previously created with SolarWinds VoIP and Network Quality Manager. If you have already created an operation with the same operation number, you must manually remove the operation from the device.

To add ICMP Echo IP SLA operations to your network devices:

  1. Log in to your SolarWinds VoIP and Network Quality Manager server as an administrator.
  2. Click Settings > All Settings > VoIP & Quality Settings.
  3. Click Add new operations in the Manage IP SLA Operations section.
  4. Select Create new operations, and click Next.
  5. Select ICMP Echo, and click Next.
  6. Select the type of path your network is configured to use. For more information, see Designating paths.
  7. Select the source nodes you want to add to your new ICMP Echo operation, and click Next.

    If you do not see your IP SLA routers in the list, you must add the devices before you can continue. For more information, see Adding Devices for Monitoring in the Web Console.

  8. Select the target nodes you want to add to your new ICMP Echo operation.
  9. To create the path in only one direction, select No, create the path in just one direction.
  10. To specify an external node as target, complete the following procedure.
    1. Click Yes, use external node as a target.
    2. Enter the IP address or host name of the external node you want to add.

      If you use a host name, the source node of the operation must be able to successfully resolve the host name.

  11. Click Next.
  12. Enter the frequency for the operation to be performed.
  13. Define your warning, critical, and maximum threshold values.
  14. To assign a type of service (ToS) or Virtual Routing and Forwarding (VRF) name for this path, expand Advanced, and enter the type of service number and VRF name in the appropriate fields.

    • The ToS octet is a decimal value (0-255) that sets the precedence for VoIP traffic monitored with Cisco IP SLA operations. The default ToS value used by SolarWinds VoIP and Network Quality Manager is 184, corresponding to Expedited Forwarding (EF) per hop behavior (PHB) and a Differentiated Service Code Point (DSCP) value of 46. For more information about the ToS octet, see Setting traffic precedence.
    • VRFs only exist on provider edge routers (PE). A VRF is a routing and forwarding table instance, and you can have more than one VRF per PE. The VRF includes routes that are available to a certain set of sites. A VRF is named based on the VPNs it services and on the role of the CE in the topology.
  15. Click Next.
  16. To rename operations or edit any other operation properties, select the operations you want to modify, and click Edit.
  17. Review the operations you want to create, and click Create Operations.

    Depending on the number of operations that are being created, this process can take several minutes.

  18. Click Go to VNQM Home to finish the procedure and return to the SolarWinds VoIP and Network Quality Manager home page.
 
Last modified
08:35, 13 Apr 2017

Tags

Classifications

Public