Submit a ticketCall us

Quickly Address Software Vulnerabilities
Patch Manager is an intuitive patch management software which extends the capabilities of WSUS and SCCM to not only patch Windows® servers and workstations, and Microsoft® applications, but also other 3rd-party applications which are commonly exploited by hackers. Learn more about our patch management solution.

 

Home > Success Center > VoIP & Network Quality Manager (VNQM) > VNQM 4.4 Administrator Guide > Adding IP SLA operations > Adding DHCP IP SLA operations to devices

Adding DHCP IP SLA operations to devices

Table of contents
No headers

Dynamic Host Configuration Protocol (DHCP) IP SLA operations measure the time taken to discover a DHCP server and then obtain a leased IP address from it. These operations ensure that your DHCP servers are operational and performing as expected.

You cannot add operations that have been previously created with SolarWinds VoIP and Network Quality Manager. If you have already created an operation with the same operation number, you must manually remove the operation from the device.

To add DHCP IP SLA operations to your network devices:

  1. Log in to your SolarWinds VoIP and Network Quality Manager server as an administrator.
  2. Click Settings > All Settings > VoIP & Quality Settings.
  3. Click Add new operations in the Manage IP SLA Operations section.
  4. Select Create new operations, and click Next.
  5. Select DHCP, and click Next.
  6. Select the nodes you want to add to your new DHCP operations, and click Next.

    If you do not see your IP SLA routers in the list, you must add the devices before you can continue. For more information, see Adding Devices for Monitoring in the Web Console.

  7. Enter the IP address of the DHCP server to be tested, and click Next.
  8. Enter the frequency for the operation to be performed.
  9. Define your warning, critical, and maximum threshold values, and click Next.
  10. To rename operations or edit any other operation properties, select the operations you want to modify, and click Edit.
  11. Review the operations you want to create, and click Create Operations.

    Depending on the number of operations that are being created, this process can take several minutes.

  12. Click Go to VNQM Home to finish the procedure and return to the SolarWinds VoIP and Network Quality Manager home page.
 
Last modified
08:34, 13 Apr 2017

Tags

Classifications

Public