Submit a ticketCall us

WebinarFREE IT Monitoring Webcast

Don’t miss out on our webcast, Essential IT Monitoring with SolarWinds ipMonitor, where we will show you how to keep an eye on your IT environment from one centralized, affordable, and lightweight monitoring tool: SolarWinds® ipMonitor®.

Register now.

Home > Success Center > Virtualization Manager (VMAN) > VMAN - Knowledgebase Articles > How to configure Virtualization Manager to work when only TLS 1.2 is enabled

How to configure Virtualization Manager to work when only TLS 1.2 is enabled

Table of contents

Updated 1/22/2018

Overview

You can make a small change to VMAN's configuration files to enable VMAN to work properly when only TLS 1.2 is enabled and TLS 1.0 and 1.1 are disabled.

Environment

  • VMAN 8.0 and later

Steps

Uncomment the following line in the three config files listed below:

 

<!-- <add key="SecurityProtocols" value="TLS10, TLS11, TLS12" /> -->

 

Config file locations
"c:\Program Files (x86)\Common Files\SolarWinds\JobEngine.v2\SWJobEngineSvc2.exe.config" 
"c:\Program Files (x86)\Common Files\SolarWinds\JobEngine.v2\SWJobEngineWorker2.exe.config" 
"c:\Program Files (x86)\Common Files\SolarWinds\JobEngine.v2\SWJobEngineWorker2x64.exe.config"

 

 

 

Last modified

Tags

Classifications

Public