Submit a ticketCall us

Putting Your Logs Where They Belong with the New SolarWinds Log Manager for Orion

The new SolarWinds® Log Manager for Orion® finally puts your log data right where it belongs, in the heart of your Orion console. Gain insight into the performance of your infrastructure by monitoring your logs in a unified console allowing you to see a wealth of information about the health and performance of your network and servers.

Reserve a Seat for Wednesday May 23rd 11am CDT | Reserve a Seat for Tuesday May 22nd 10:30am GMT | Reserve a Seat for Tuesday May 22nd 1pm SGT / 3pm AEST

Home > Success Center > User Device Tracker (UDT) > UDT Administrator Guide > Common tasks with SolarWinds UDT > Find Endpoints in a Subnet

Find Endpoints in a Subnet

Table of contents
No headers
Created by Steven Bansil_ret, last modified by Steven Bansil_ret on Jan 20, 2017

Views: 118 Votes: 0 Revisions: 3

Scenario:Find all endpoints currently on a subnet.

  1. Click the Device Tracker tab, if not already selected.
  2. Locate UDT Search.
  3. Click Menu in the search box, and then select the desired option(s) for the search.

    MAC addresses are stored without formatting; you can successfully search for a MAC address with format xxxx.xxxx.xxxx or xx-xx-xx-xx-xx-xx or xx:xx:xx:xx:xx:xx.

  4. Enter the desired term for the search.

    This example uses IP address 10.199.3.* as the target subnet.

    In this case, you are searching for an exact match. Specific matches are required sought unless wildcards are used in the search term. This means that if you search for laptop and there is a machine named laptop01, you will not find it unless you search for laptop01 or laptop* (or other valid wildcard search).

    More wildcard examples:

    • Fa1*: (when used with Port Number search option) matches any port number that begins with Fa1 followed by any characters.
    • MAC Address: 00:0C*
    • IP Address: 10.10.10.*
    • Cisco3750-* (assuming each of three stacked switches were added as individual devices, using a common naming convention like Cisco3750-1, Cisco3750-2, Cisco3750-3; in this search, you would select the ‘Connected To' drop-down list beside Search)
  5. Press Enter or click search. The search results are displayed in a scrollable, tabular view:

    Match Item

    Match Type

    Endpoint IP Address

    Endpoint IP Address

    Endpoint IP Address

    Endpoint IP Address

    Endpoint IP Address

    Endpoint IP Address



  6. From the search results, you can select an item, and then click Add To Watch List in order to add the item to the device watch list.
Last modified