Submit a ticketCall us

ebook60.pngHow to be a Cisco® ASA ace

Our eBook, Thou Shalt Not Pass…I Think?! can help you overcome the challenges of monitoring and managing Cisco ASA firewalls. This eBook is a great read if you’ve been frustrated with monitoring firewalls, managing ACL configs, and troubleshooting VPN connections.

Get your free eBook.

Home > Success Center > User Device Tracker (UDT) > Alert me when an access port connected to two or more MAC addresses is not working

Alert me when an access port connected to two or more MAC addresses is not working

Table of contents

Updated October 18, 2016

Overview

This article explains why the Out-of-the-box alert: Alert me when an access port connected to two or more MAC addresses does not work at certain times. It provides an overview on how this alert is designed.

Environment

All UDT versions

Steps

  1. Verify the trigger action and make sure that it is similar to the below screenshot.
  2. When simulating or testing the alert and if it does not work, check the port that you are testing to see if it is configured as an access port or tagged port. This is the number one requirement of this alert in NPM, that a port is configured as an Access Port or Tagged Port.
  3. Telnet to the device then type the command: show interface,make sure that the port is tagged or is configured as access port. 
    This illustration shows untagged port, which is considered as trunk port. 

 

 

 

Last modified

Tags

Classifications

Public