Submit a ticketCall us

ebook60.pngHow to be a Cisco® ASA ace

Our eBook, Thou Shalt Not Pass…I Think?! can help you overcome the challenges of monitoring and managing Cisco ASA firewalls. This eBook is a great read if you’ve been frustrated with monitoring firewalls, managing ACL configs, and troubleshooting VPN connections.

Get your free eBook.

Home > Success Center > Storage Resource Monitor (SRM) > SRM: Enable an EMC Xtremio array

SRM: Enable an EMC Xtremio array

Updated: 11/1/16



This articles provides information about addding a EMC XtremIO array to SRM. XtremIO arrays use a RESTful API on the XtremIO Management Server (XMS) to expose data to SRM and does not require configuring or enabling.


  • 6.3+

Credentials required to add the array

Ensure you have the following information before adding the provider to SRM:

  • IP address or hostname for the array
  • XMS username. The default is xmsadmin
  • XMS password. The default is Xtrem10 (v2.4 and above) or 123456 (earlier versions)
  • Protocol. The default is HTTPS
  • HTTP port. The default is 80
  • HTTPS port. The default is 443

Disclaimer: Please note, any content posted herein is provided as a suggestion or recommendation to you for your internal use. This is not part of the SolarWinds software or documentation that you purchased from SolarWinds, and the information set forth herein may come from third parties. Your organization should internally review and assess to what extent, if any, such custom scripts or recommendations will be incorporated into your environment.  You elect to use third party content at your own risk, and you will be solely responsible for the incorporation of the same, if any.





Last modified