Submit a ticketCall us
Home > Success Center > Storage Resource Monitor (SRM) > SRM - Knowledgebase Articles > SRM: Enable a Nimble array

SRM: Enable a Nimble array

Created by Nigel, last modified by Nigel on Feb 21, 2018

Views: 325 Votes: 0 Revisions: 14

Updated: 1/16/18


Nimble Storage arrays are monitored through onboard REST API on the array group leader. 

The Nimble array needs to have version 4.3.0 or higher firmware installed.

The Nimble Storage array does not require special configuration to be monitored by SRM.

For further information, see the documentation that came with your array, visit Nimble Support, or contact your vendor.


  • SRM 6.6+
  • Nimble storage array (All Flash series - AF1000, AF3000, AF7000, AF9000, Adaptive Flash - CS1000, CS3000, CS5000, CS7000) with firmware 4.3.0 or higher

Credential required to add the array

Ensure you have the following information:

  • IP address or hostname for the group.
  • Credential name,  or array API username and password
  • Protocol. The default is HTTPS
  • API port. The default is 5392

Disclaimer. Please note, any content posted herein is provided as a suggestion or recommendation to you for your internal use. This is not part of the SolarWinds software or documentation that you purchased from SolarWinds, and the information set forth herein may come from third parties. Your organization should internally review and assess to what extent, if any, such custom scripts or recommendations will be incorporated into your environment.  You elect to use thirdparty content at your own risk, and you will be solely responsible for the incorporation of the same, if any.

Last modified