Submit a ticketCall us

AnnouncementsTHWACKcamp 2018 is here

2018 is the seventh year for THWACKcamp™, and once again we’ll be live October 17 – 18 with packed session tracks covering everything from network monitoring and management, to change control, application management, storage, cloud and DevOps, security, automation, virtualization, mapping, logging, and more.

Register for online sessions.

Home > Success Center > Storage Resource Monitor (SRM) > SRM - Knowledgebase Articles > SRM: Enable a Dell EqualLogic PS Series array

SRM: Enable a Dell EqualLogic PS Series array

Updated: 11/1/16

Overview

The article contains information on enabling Dell EqualLogic PS Series arrays so they can be monitored by SRM. The array communicates using embedded SNMP on the array, and does not require enabling.

For more information, please consult the documentation supplied with your array, or visit the Dell support site at http://www.dell.com/support

Environment

  • SRM 6.0+

Credentials required for adding array 

Ensure you have the following:

  • IP address for the array
  • SNMP community string for the array. By default this is public
  • Array SNMP port. By default this is 161

 

Disclaimer: Please note, any content posted herein is provided as a suggestion or recommendation to you for your internal use. This is not part of the SolarWinds software or documentation that you purchased from SolarWinds, and the information set forth herein may come from third parties. Your organization should internally review and assess to what extent, if any, such custom scripts or recommendations will be incorporated into your environment.  You elect to use third party content at your own risk, and you will be solely responsible for the incorporation of the same, if any.

 

 

Last modified

Tags

Classifications

Public