Submit a ticketCall us

WebinarUpcoming Webinar: How Help Desk and Remote Support Pays for Itself

Learn how help desk software can simplify ticketing management, allow you to track hardware and software assets, and accelerate the speed of IT support and service delivery. Gain insights on how remote support tools allow your IT team to maximize their efficiency and ticket resolution by expediting desktop troubleshooting, ultimately helping keep end-users happy and productive.

Register here.

Home > Success Center > Storage Manager (STM) > Storage Manager (STM) Documentation > SRM Profiler Administrator Guide > Adding storage arrays > Xiotech Magnitude 3D 4000

Xiotech Magnitude 3D 4000

Updated: June 16, 2017

Find details about adding a Xiotech Magnitude 3D 4000 array to SRM Profiler. This section includes what you need before you begin, details about adding your array, and guidance for configuring your array.

Before you begin

  • Your array must be installed and running before it can be added to SRM Profiler. Contact your array vendor for additional support on installing and troubleshooting your array.
  • You will need to obtain the following information.
    • The Serial Number for the Xiotech device you want to monitor.
    • The IP address of the XWS that manages the array.
    • The Client / User Name used to log into the ICON. By default, this is set to Administrator.
    • The ICON password for the Client / User Name.

Contact your array administrator or see the array documentation for assistance on obtaining this information.

Add the array

When add a device, choose Xiotech Magnitude 3D 4000 from the Choose your Array Type menu. Click OK.

Complete the fields in the Create New Device for Agent: Magnitude 3D 4000 window.

  • Select Agent: Select a SRM Profiler proxy agent for this device.
  • Serial Number: Add the Serial number you obtained in the "Before you begin" section.
  • Device Display Name: Enter the display name for this resource.

Configure the array

From the Configure Device window, enter the information you collected in the "Before you begin" section.

  • Poll Status: Select On.
  • XWS IP Address: The IP address of the XWS that manages the array.
  • Client /User Name: The client / User Name used to log into the ICON. By default, this is set to Administrator.
  • Password: The password for the ICON server.
  • ICON: Select the ICON managing the Magnitude.
  • The default values can be used for the remaining configuration fields. Or you can click the Show Advanced Fields and enter your custom configuration values.
Last modified