Submit a ticketCall us

AnnouncementsSystem Monitoring for Dummies

Tired of monitoring failures disrupting the system, application, and service? Learn the key monitoring concepts needed to help you create sophisticated monitoring and alerting strategies that can help you save time and money. Read the eBook.

Get your free eBook.

Home > Success Center > Storage Manager (STM) > Storage Manager (STM) Documentation > SRM Profiler Administrator Guide > Adding storage arrays > Dell Equalogic

Dell Equalogic

Updated: June 16, 2017

Find details about adding a Dell Equalogic array to SRM Profiler. This section includes what you need before you begin, details about adding your array, and guidance for configuring your array.

Before you begin

  • Your array must be installed and running before it can be added to SRM Profiler. Contact your array vendor for additional support on installing and troubleshooting your array.
  • Get the IP address of the array. Refer to your array administrator or your array documentation with questions about obtaining this information.

Add the array

When add a device, choose Dell Equalogic from the Choose your Array Type menu. Click OK.

Complete the fields in the Create New device for Agent: EqualLogic PS Series.

  1. Select Agent: Select the SRM Profiler agent you want to monitor your array.
  2. IP Address: Enter the IP address of your array.
  3. Active: Keep this box checked. Clearing this check box stops data collection for your array.
  4. Click Next.

Configure the array

  1. Click Test to confirm the default values are working. The test can take up to 90 seconds.
  2. Click Show Advanced Fields to customize your array configuration. Click Test to confirm the connection. The test can take up to 90 seconds.
  3. When the Test Results show successfully connected, save your configuration.

Additional information







Requires SRM Profiler agent?

No agent installed on array


  • IP Address of the storage array
  • Read-only SNMP version 1 community string for the EqualLogic group


  • UNIX - Run as root
  • Windows - Local System account/Domain Account

Read/Write Actions

Read Only

Ports Used

161 (UDP) on the EqualLogic Group IP


See the SRM Profiler Ports section below.

Requires a SRM Profiler Proxy agent?

Yes –Windows or Linux



Last modified