Submit a ticketCall us
Home > Success Center > Storage Manager (STM) > Storage Manager (STM) Documentation > SRM Profiler Administrator Guide > Install SRM Profiler agents > Install an agent on Windows Cluster

Install an agent on Windows Cluster

Table of contents
No headers

Updated: June 16, 2017

The following steps detail the installation of SRM Profiler agents onto a Windows Cluster.

  1. Log in remotely to the Active node of the cluster as Local Administrator.
  2. Execute the installer.
  3. Enter the destination path where you want to install the agent, select the location on the shared drive, and then enter the Server IP Address of the SRM Profiler server.
  4. Leave remaining options set to default.
  5. Do not start the agent. Click No when prompted.
  6. After the agent is installed on this node in the cluster, failover to the other node and repeat the steps above.
  7. When prompted, select the same destination path previously selected.

To create a new cluster device:

  1. Remotely log in to the server with the virtual IP Address.
  2. Click Start > All Programs > Administrative Tools > Failover Cluster Manager.
  3. Right-click on Services and Applications > More Actions > Create Empty Service or Application.
  4. Right-click Create Empty Service or Application > Properties. Give a proper name, and then save it.
  5. Right-click on the service, and select Take this service or Application Offline from the menu.


  6. Right-click the offline Server, and then select Add a Device > Generic Service.
  7. Select SolarWinds SRM Profiler agent Service from the list, and then click Next.


  8. Click Finish.
  9. Right-click and select Bring the service or application online.


  10. Log in to SRM Profiler web console, and click Settings > All Devices > Choose Type > OS Windows > Add.


  11. Enter the Virtual IP Address of the cluster and provide a Display Name.


  12. Click Next, and then Save.
Last modified