Submit a ticketCall us

Systems Monitoring for Dummies
Our new eBook will teach you the fundamentals and help you create monitors and alerts that are effective, meaningful, and actionable. Monitoring is more than a checkbox on your to-do list. This free eBook will give you practical advice to help you succeed in all aspects of monitoring – discovery, alerting, remediation, and troubleshooting. Don’t miss out on this indispensable resource for newbies, experienced IT pros, and everyone in between. Register Now.

Home > Success Center > Storage Manager (STM) > SRM Profiler Administrator Guide > Adding storage arrays > Xiotech Magnitude 3D 3xxx

Xiotech Magnitude 3D 3xxx

Updated: June 16, 2017

Find details about adding a Xiotech Magnitude 3D 3xxx array to SRM Profiler. This section includes what you need before you begin, details about adding your array, and guidance for configuring your array.

Before you begin

  • Your array must be installed and running before it can be added to SRM Profiler. Contact your array vendor for additional support on installing and troubleshooting your array.
  • You will need to obtain the following information.
    • The Serial Number for the Xiotech device you want to monitor.
    • The IP address of the XWS that manages the array.
    • The Client / User Name used to log into the ICON. By default, this is set to Administrator.
    • The ICON password for the Client / User Name.

Contact your array administrator or refer to your array documentation for assistance obtaining this information.

Adding the array

  • When adding a device, choose Xiotech Magnitude 3D 3xxx from the Choose your Array Type menu. Click OK.
  • Select Agent: Select a SRM Profiler proxy agent for this device.
  • Serial Number: Add the Serial number you obtained in the "Before you begin" section.
  • Device Display Name: Enter the display name for this resource.

Configuring the array

From the Configure Device window, enter the information you collected in the "Before you begin" section.

  • Poll Status: Select On.
  • XWS IP Address: The IP address of the XWS that manages the array.
  • Client /User Name: The client / User Name used to log into the ICON. By default, this is set to Administrator.
  • Password: The password for the ICON server.
  • ICON: Select the ICON managing the Magnitude.
  • The default values can be used for the remaining configuration fields. Or you can click the Show Advanced Fields and enter your custom configuration values.
 
Last modified

Tags

Classifications

Public