Submit a ticketCall us

Announcing NCM 7.7
With NCM 7.7, you can examine the rules that make up an access control list for a Cisco ASA device. Then you can apply filters to display only rules that meet the specified criteria, order the rules by line number or by the hit count, and much more.
See new features and improvements.

Home > Success Center > Storage Manager (STM) > SRM Profiler Administrator Guide > Adding storage arrays > Sun StorageTek 99xx Series

Sun StorageTek 99xx Series

Updated: June 16, 2017

The following information provides details for adding a Sun StorageTek 99xx Series array to SRM Profiler.

Before you begin

Provider IP address

The IP address of the HiCommand Device manager

Provider Admin Username

The Administrator Username set up when adding a subsystem to the HiCommand Device Manager

Provider Admin Password

The Administrator Password set when adding a subsystem to the HiCommand Device Manager

  • An SMI-S provider must be installed and configured before you can add your Sun StorageTek 99xx Series array to SRM Profiler. The HDS provider is part of the HiCommand Device Manager as illustrated in the diagram below.

  • See the Hitachi Data Systems (HDS) provider section for details on installing the HDS provider in the HiCommand Device Manager. Contact your Sun StorageTek 99xx vendor for additional SMI-S provider support.
  • Before adding your Sun StorageTek 99xx Series array to SRM Profiler, you must collect the information listed in the following table:

Add the array

Use the Add a Device wizard to add the array to SRM Profiler.

Troubleshoot with the Add a Device wizard

Troubleshoot with the Add a Device wizard provides details and guidance about the error messages you might encounter.

Manual configuration

Use the manual configuration if you must specify parameters that are not available from the Add a Device Wizard.

Other parameters are editable from this window. Make changes only if you are sure of a parameter value, otherwise use the default value.

  1. In step 1 of the Add a Device Wizard, select Sun Storage Tek 99xxSeries.
  2. From the Add a Device – Sun Storage Tek 99xxSeries window, click the Manual Configuration link.
  3. In the Create New Device for Agent: Storage Array window, provide the following information:
    • Server IP Address: From the drop down menu, select the SRM Profiler proxy agent you want to monitor your array.
    • Device Display Name: Enter a meaningful name for your array.
    • Storage Array Type: Set to Storage Array HDS.
    • Active: Be sure this box is selected. Clearing this check box stops data collection for your array.
  4. Click Next.
  5. In the Configure Device window, provide the values for the following fields.
    • Status: Select On.
    • User Name: Enter the user name used to access the provider. Typically this is the username used to access the HiCommand Device Manager.
    • Password: Enter the password used to access the provider. Typically this is the password used to access the HiCommand Device Manager.
    • Provider IP Address: Enter the IP address of the HiCommand Device Manager.
    • Serial No: Enter the serial number of the array.
  6. Click Test to test the connectivity between the SRM Profiler proxy agent and the array SMI-S provider. You must enter the username, password, and provider IP before you can test the connection.
  7. Click Save to save the configuration and push it to the SRM Profiler proxy agent to begin monitoring the array.
 
Last modified
11:16, 26 Jun 2017

Tags

Classifications

Public