Submit a ticketCall us

Announcing NCM 7.7
With NCM 7.7, you can examine the rules that make up an access control list for a Cisco ASA device. Then you can apply filters to display only rules that meet the specified criteria, order the rules by line number or by the hit count, and much more.
See new features and improvements.

Home > Success Center > Storage Manager (STM) > SRM Profiler Administrator Guide > Adding storage arrays > IBM N-Series Operations Manager

IBM N-Series Operations Manager

Updated: June 16, 2017

Find details about adding an IBM N Series Operations Manager array to SRM Profiler. This section includes what you need before you begin, details about adding your array, and guidance for configuring your array.

Before you begin

  • Your array must be installed and running before it can be added to SRM Profiler. Contact your array vendor for additional support on installing and troubleshooting your array.
  • You must obtain the following information:
    • DFM Server IP Address
    • Username
    • Password

    Contact your array administrator or refer to your array documentation for questions about obtaining this information.

One or more SRM Profiler proxy agents for Windows/Unix/Linux must be used to perform File Analysis on an IBM N-Series. Use Windows Proxy Agents to perform analysis on CIFS shares, and Unix/Linux Proxy Agents to perform analysis on NFS mounts.

Add the array

When add a device, choose IBM N-Series Operations Manager from the Choose your Array Type menu. Click OK.

Complete the fields in the Create New device for Agent: IBM N Series Operations Manager window.

  • Select Agent: Select the SRM Profiler proxy agent you want to monitor your array.
  • DFM Server IP Address: Enter the IP address of the DFM Server.

Configure the array

  1. Enter the username and password you obtained in the Before you begin section.
  2. For the other values, you can use the default values or you can click Show Advanced Fields to enter your custom values.
  3. Click Save.
Last modified
11:16, 26 Jun 2017