Submit a ticketCall us

Announcing NCM 7.7
With NCM 7.7, you can examine the rules that make up an access control list for a Cisco ASA device. Then you can apply filters to display only rules that meet the specified criteria, order the rules by line number or by the hit count, and much more.
See new features and improvements.

Home > Success Center > Storage Manager (STM) > SRM Profiler Administrator Guide > Adding storage arrays > IBM DS3xxx DS4xxx DS5xxx

IBM DS3xxx DS4xxx DS5xxx

Updated: June 16, 2017

Find the information you need to add your IBM DS 3xxx, IBM DS4xxx, and DS5xxx arrays to SRM Profiler. Below are details about what you need before you begin, instructions on using the Add a Device Wizard, and guidance for resolving the troubleshooting messages you might encounter.

Before you begin

Provider IP address

IP address of the SMI-S provider

Provider Admin Username

The Administrator Username is assigned when the SMI-S provider is installed.

Provider Admin Password

The Administrator Password is assigned when the SMI-S provider is installed.

  • An SMI-S provider must be installed and configured before you can add the IBM DS3xxx, DS4xxx, or DS5xxx array to SRM Profiler. The SMI-S provider is a separate piece of software as illustrated in the diagram below.

    File:Success_Center/Reusable_content_-_InfoDev/SRM_Profiler/Add_IBM_DS3xxx_DS4xxx_DS5xxx/03000054_439x97.png

  • See the Provider section for more information on downloading and installing the provider software or contact IBM for support.
  • Before adding your IBM DS3xxx, DS4xxx, IBM DS5xxx array to SRM Profiler, you must collect the information listed in the table below.

Add the array

Use the Add a Device wizard to add your array to SRM Profiler.

Troubleshoot with the Add a Device wizard

Troubleshoot with the Add a Device wizard provides details and guidance about the error messages you might encounter.

Manual configuration

Use the manual configuration if you must specify parameters that are not available from the Add a Device Wizard.

  1. In step 1 of the Add a Device Wizard, select IBM DS3xxx, DS4xxx, DS5xxx.
  2. From the Add a Device – IBM DS3xxx, DS4xxx, DS5xxx window, click the Manual Configuration link.
  3. In the Create New Device for Agent: Storage Array window, provide the following information:
    • Server IP Address: From the drop down menu, select the SRM Profiler agent you want to monitor your array.
    • Device Display Name: Enter a meaningful name for your array.
    • Storage Array Type: Set to Storage Array IBM DS 3k, 4k, 5k series.
    • Active: Keep this box checked. Clearing this check box stops data collection for your array.
  4. In the Configure Device window, provide the values for the following fields.

    Other parameters are editable from this window. Make changes only if you are sure of a parameter value, otherwise leave the default value.

    • Status: Select On.
    • User Name: Enter the user name used to access the provider.
    • Password: Enter the password used to access the provider.
    • Provider IP Address: Enter the IP address of the provider.
    • Storage Array WWN: Enter the array identifier (WWN of the IBM DS3xxx, DS4xxx, and DS5xxx array).
  5. Click Test to test the connectivity between the agent and the array's SMI-S provider. You must enter the username, password, and provider IP before you can test the connection.
  6. Click Save to save the configuration and push it to the agent to begin monitoring the array.

Additional information

Versions/Models

3000, 4000, 5000

Features

Asset

Storage

Performance

  • Disk Performance

Requires SRM Profiler agent?

No

Prerequisites

  • IP Address of Storage Processors
  • Latest LSI Engenio SMI-S Provider installed on a 32 bit Windows/Linux server that has IP connectivity to the storage processors

Credentials

Account and password are stored in SRM Profiler database and configuration files on SRM Profiler proxy agent using custom encryption

Read/Write Actions

Read Only

Ports Used

Configurable: 5988 (HTTP) or 5989 (HTTPS) used by SMI-S provider

Non-Configurable: 2463 used to set RPC sessions to the storage controller from SMI-S provider.

Communication

  • See the SRM Profiler Ports section below..
  • Can be HTTP/HTTPS between SRM Profiler proxy agent and the LSI Engenio SMI-S provider.

Requires SRM Profiler proxy agent?

Yes – Windows or Linux

 
Last modified
11:17, 26 Jun 2017

Tags

Classifications

Public