Submit a ticketCall us

Announcing NCM 7.7
With NCM 7.7, you can examine the rules that make up an access control list for a Cisco ASA device. Then you can apply filters to display only rules that meet the specified criteria, order the rules by line number or by the hit count, and much more.
See new features and improvements.

Home > Success Center > Storage Manager (STM) > SRM Profiler Administrator Guide > Adding storage arrays > HP Lefthand P4000

HP Lefthand P4000

Updated: June 16, 2017

Find details about adding an HP LeftHand P4000 array to SRM Profiler. This section includes what you need before you begin, details about adding your array, and guidance for configuring your array.

Before you begin

  • Your array must be installed and running before it can be added to SRM Profiler. Contact your array vendor for additional support on installing and troubleshooting your array.
  • Get the IP address of your array. Refer to your array administrator or your array documentation with questions about obtaining this information.

Add the array

  1. When add a device, select HP LeftHand P4000 from the Choose your Array Type menu. Click OK.
  2. Fill in the fields In the Create New Device for Agent: HP P4000 Series window.
    • Select Agent: Select an Agent for this device.
    • IP Address: Enter the IP address of your array that you obtained in the "Before you begin" section.
    • Device Display Name: Enter the name you want displayed for this resource.
    • Active: Keep this box checked box. Clearing this check box stops data collection for your array.
  3. Click Next.

Configure the array

Test your array In the Configure Device window.

  • Click Test to confirm the default values are working. The test can take up to 90 seconds.
  • Click Show Advanced Fields to customize your array configuration. Click Test to confirm the connection. The test can take up to 90 seconds
  • When the Test Results show Successfully connected, save your configuration

For details on enabling SNMP polling, see Enable SNMP for HP LeftHand.

Additional information

Versions/Models

P4000

Features

Asset

Configuration

Storage

Requires SRM Profiler agent?

No

Prerequisites

  • SNMP enabled
  • IP address of management node and each node
  • SRM Profiler Proxy Agent in Access Control List

Credentials

Account and password are stored in SRM Profiler database and configuration files on SRM Profiler proxy agent using custom encryption

Read/Write Actions

Read Only

Ports Used

161 on management node and each node

Communication

  • See the SRM Profiler Ports section below.
  • SNMP from SRM Profiler proxy agent to management node and each node

Requires a SRM Profiler proxy agent?

Yes – Windows or Linux

 
Last modified
11:16, 26 Jun 2017

Tags

Classifications

Public