Submit a ticketCall us

Systems Monitoring for Dummies
Our new eBook will teach you the fundamentals and help you create monitors and alerts that are effective, meaningful, and actionable. Monitoring is more than a checkbox on your to-do list. This free eBook will give you practical advice to help you succeed in all aspects of monitoring – discovery, alerting, remediation, and troubleshooting. Don’t miss out on this indispensable resource for newbies, experienced IT pros, and everyone in between. Register Now.

Home > Success Center > Storage Manager (STM) > SRM Profiler Administrator Guide > Adding storage arrays > EMC Isilon

EMC Isilon

Updated: June 16, 2017

Find details about adding an EMC Isilon array to SRM Profiler. This section includes what you need before you begin, details about adding your array, and guidance for configuring your array.

Before you begin

Your array must be installed and running before it can be added to SRM Profiler. Contact your array vendor for additional support on installing and troubleshooting your array.

Collect the information in the following table:

IP Address

IP address of the EMC Isilon cluster.

SNMP community string

The SNMP community string is configured on the EMC Isilon array.

Refer to your array administrator or your array documentation with questions about obtaining this information.

Add the array

When add a device, choose EMC Isilon from the Choose your Array Type menu. Click OK.

Fill in the required fields in the Create New Device Agent: EMC Isilon.

File:Success_Center/Reusable_content_-_InfoDev/SRM_Profiler/Add_EMC_Isilon/0300004F_394x170.png

  • Select Agent: Select the SRM Profiler agent you want to monitor your array.
  • Windows Device List: Select a Windows server to retrieve the CIFS shares exposed by the NAS devise.
  • UNIX Device List: Select a Unix or Linux server to retrieve the NFS shares exposed by the NAS devise.
  • IP Address: Enter the IP address of your EMC Isilon array.
  • Device Display Name: Enter a descriptive name for your device. This will be displayed within SRM Profiler.
  • Active: Keep this box checked. Clearing this check box stops data collection for your array.

Configure the array

  • Click Test to confirm the default values are working. The test can take up to 90 seconds.
  • Click Show Advanced Fields to customize your array configuration. Click Test to confirm the connection. The test can take up to 90 seconds.
  • When the Test Results show Successfully connected, save your configuration to begin monitoring the array.
 

 

Last modified

Tags

Classifications

Public