Submit a ticketCall us

Systems Monitoring for Dummies
Our new eBook will teach you the fundamentals and help you create monitors and alerts that are effective, meaningful, and actionable. Monitoring is more than a checkbox on your to-do list. This free eBook will give you practical advice to help you succeed in all aspects of monitoring – discovery, alerting, remediation, and troubleshooting. Don’t miss out on this indispensable resource for newbies, experienced IT pros, and everyone in between. Register Now.

Home > Success Center > Storage Manager (STM) > SRM Profiler Administrator Guide > Adding storage arrays > Dell Equalogic

Dell Equalogic

Updated: June 16, 2017

Find details about adding a Dell Equalogic array to SRM Profiler. This section includes what you need before you begin, details about adding your array, and guidance for configuring your array.

Before you begin

  • Your array must be installed and running before it can be added to SRM Profiler. Contact your array vendor for additional support on installing and troubleshooting your array.
  • Get the IP address of the array. Refer to your array administrator or your array documentation with questions about obtaining this information.

Add the array

When add a device, choose Dell Equalogic from the Choose your Array Type menu. Click OK.

Complete the fields in the Create New device for Agent: EqualLogic PS Series.

  1. Select Agent: Select the SRM Profiler agent you want to monitor your array.
  2. IP Address: Enter the IP address of your array.
  3. Active: Keep this box checked. Clearing this check box stops data collection for your array.
  4. Click Next.

Configure the array

  1. Click Test to confirm the default values are working. The test can take up to 90 seconds.
  2. Click Show Advanced Fields to customize your array configuration. Click Test to confirm the connection. The test can take up to 90 seconds.
  3. When the Test Results show successfully connected, save your configuration.

Additional information

Versions/Models

4.x

Features

Asset

Storage

Performance

Requires SRM Profiler agent?

No agent installed on array

Prerequisites

  • IP Address of the storage array
  • Read-only SNMP version 1 community string for the EqualLogic group

Credentials

  • UNIX - Run as root
  • Windows - Local System account/Domain Account

Read/Write Actions

Read Only

Ports Used

161 (UDP) on the EqualLogic Group IP

Communication

See the SRM Profiler Ports section below.

Requires a SRM Profiler Proxy agent?

Yes –Windows or Linux

 

 

Last modified

Tags

Classifications

Public