Submit a ticketCall us

Quickly Address Software Vulnerabilities
Patch Manager is an intuitive patch management software which extends the capabilities of WSUS and SCCM to not only patch Windows® servers and workstations, and Microsoft® applications, but also other 3rd-party applications which are commonly exploited by hackers. Learn more about our patch management solution.

 

Home > Success Center > Server & Application Monitor (SAM) > SAM 6.4 Administrator Guide > Alert Actions for SAM > Set Custom Status for alerts in SAM

Set Custom Status for alerts in SAM

Table of contents
No headers

Updated: 12-1-2016

Setting a custom status can be useful if you want to change the status of a familiar node, but does not affect actual, polled values. For example, if the custom status is set to Up, but the server is down or unresponsive, packet loss continues to be 100%. Alerts based on the status do not trigger in this instance, but alerts based on a polled value, such as packet loss, do trigger.

When the status is set with an alert, the status does not update to the actual, polled status. The status must be switched manually to a different status or configured to use the polled status. Change the status to use the polled status from the node details page or create a reset action to set the status to use the polled status.

  1. When editing or adding an alert, click Add Action in the Trigger or Reset Action section of the Alert Wizard.

  2. Select the Set Custom Status option, then click Configure Action.
  3. Under Change Object Status Manually:
    1. Select Change to a specific status if you are creating a trigger action, and choose a status.
    2. Select Use polled status if you are creating a reset action.
    3. Choose the nodes you want to set the status.
  4. Schedule the action by selecting Time of Day > Use special Time of Day schedule for this action. This schedule only applies to the alert action you are editing.

    This is often used to prevent an action from occurring during specific windows.

  5. Select how frequently this action occurs for each triggered alert in Execution Settings.

  6. Click Add Action.

The action is added to the trigger or reset action list, and you can test the action using the Simulate button. When the trigger or reset conditions of the alert are met, the status for the object changes.

 
Last modified
13:47, 17 Mar 2017

Tags

Classifications

Public