Submit a ticketCall us

Announcing NPM 12.2
With NPM 12.2 you can monitor your Cisco ASA firewalls, to monitor VPN tunnels for basic visibility and troubleshooting tunnels. NPM 12.2 also uses the SolarWinds Orion Installer so you can easily install and upgrade one or more Orion Platform products simultaneously.
See new features and improvements.

Home > Success Center > Server & Application Monitor (SAM) > SAM 6.4 Administrator Guide > View monitored objects on maps using Network Atlas for SAM > Connect objects on maps automatically with ConnectNow in Network Atlas for SAM

Connect objects on maps automatically with ConnectNow in Network Atlas for SAM

Using the ConnectNow tool, Network Atlas can automatically draw lines between directly connected nodes on your network.

ConnectNow displays connections based on data polled for nodes with enabled L2 and L3 topology pollers, and for unidentified nodes.

An unidentified node is a node that was found on the network but which is not managed by Orion. These devices might be switches, hubs, routers, or other devices without names or addresses.
Unidentified nodes can be virtual, generated to signify an indirect connection in your map. For example, when a topology calculation cannot find any direct connections between two nodes, an unidentified node is generated between the two known nodes.

  • The ConnectNow tool cannot draw indirect connections between nodes. For example, if nodes A and C are connected indirectly through node B, you must manually add node B to the map to create the connections.
  • Orion Enterprise Operations Console (EOC) does not support ConnectNow.

Connect objects on maps automatically using ConnectNow

  1. Add the nodes to an open network map.

    See Add objects on a map.

  2. Click ConnectNow (File:Success_Center/Reusable_content_-_InfoDev/NPM/NPMAG_forMT/0V0/020/03000006_15x15.png) in the Home ribbon.

Update the Topology

ConnectNow displays data stored in the TopologyConnections database table. By default, the data are re-calculated every 30 minutes. You can update the data manually.

  1. Log in to the Orion Web Console as an administrator.
  2. Click Settings > All Settings in the menu bar.
  3. In the Node & Group Management grouping, click Manage Nodes.
  4. In the More Actions drop-down list, select Update Topology.

The values in the TopologyConnections table will be re-calculated and your topologies will be updated.

 
Last modified
11:14, 10 Mar 2017

Tags

Classifications

Public