Submit a ticketCall us

Announcing NCM 7.7
With NCM 7.7, you can examine the rules that make up an access control list for a Cisco ASA device. Then you can apply filters to display only rules that meet the specified criteria, order the rules by line number or by the hit count, and much more.
See new features and improvements.

Home > Success Center > Server & Application Monitor (SAM) > SAM 6.4 Administrator Guide > SAM Requirements > Configure the server to use the correct syslog port

Configure the server to use the correct syslog port

Table of contents
No headers

By default, SolarWinds Syslog Service listens for syslog messages on port 514 (UDP). If your devices use a different port for sending syslog messages, consider reconfiguring the port on devices, or change the port on which the service listens.

  1. Log in to the Orion Web Console as an administrator.
  2. Go to Advanced Configuration settings. Copy /Admin/AdvancedConfiguration/Global.aspx, and paste it into your browser address bar, after /Orion.

    The address in the address bar should look as follows:

    <your product server>/Orion/Admin/AdvancedConfiguration/Global.aspx

  3. On the Global tab, scroll down to SyslogService.SyslogSettings, and enter the UDP port number in the UDPListenPort entry.
  4. Click Save.
  5. Restart the syslog service from the notification bar or the Orion Service Manager.
 
Last modified
11:01, 3 Jul 2017

Tags

Classifications

Public