Submit a ticketCall us

Training ClassSign up for Network Performance Monitor (NPM) and Scalability instructor-led classes

Attend our instructor-led classes, provided by SolarWinds® Academy, to discuss the more advanced monitoring mechanisms available in NPM as well as how to tune your equipment to optimize its polling capabilities. NPM classes offered:
NPM Custom Monitoring and Polling
Orion Platform Scalability

Reserve your seat.

Home > Success Center > Orion Platform > Orion - Knowledgebase Articles > Supported vendor OIDs for VLAN monitoring in Orion NPM

Supported vendor OIDs for VLAN monitoring in Orion NPM

Created by Malik Haider, last modified by Melanie Boyd on Nov 16, 2016

Views: 1,843 Votes: 5 Revisions: 12

Overview

This article provides detailed list of OID(s) used by Orion NPM in VLAN monitoring.

Environment

NPM 11.0 and later

Detail

Below is comprehensive list of vendors and corresponding OID(s):

3Com

MIB OID (name) OID (numeric)
A3COM-HUAWEI-LswVLAN-MIB hwdot1qVlanName 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.2
hwVlanInterfaceAdminStatus 1.3.6.1.4.1.43.45.1.2.23.1.2.1.2.1.5
hwdot1qVlanPorts 1.3.6.1.4.1.43.45.1.2.23.1.2.1.1.1.3
A3COM-HUAWEI-LswINF-MIB hwifVLANType 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.5

Cisco

MIB OID (name) OID (numeric)
CISCO-VTP-MIB vtpVlanTable 1.3.6.1.4.1.9.9.46.1.3.1

Hewlett-Packard (HP) check GENERIC

 

Juniper

MIB OID (name) OID (numeric)
JUNIPER-VLAN-MIB jnxExVlanName 1.3.6.1.4.1.2636.3.40.1.5.1.5.1.2
jnxExVlanInterfaceOperStatus 1.3.6.1.4.1.2636.3.40.1.5.1.6.1.7
jnxExVlanPortGroupInstance 1.3.6.1.4.1.2636.3.40.1.5.1.5.1.4
jnxExVlanPortAccessMode 1.3.6.1.4.1.2636.3.40.1.5.1.7.1.5
jnxExVlanTag 1.3.6.1.4.1.2636.3.40.1.5.1.5.1.5
jnxExVlanPortStatus 1.3.6.1.4.1.2636.3.40.1.5.1.7.1.3

Generic

MIB OID (name) OID (numeric)
DOT1Q-BRIDGE-MIB dot1qVlanFdbId 1.3.6.1.2.1.17.7.1.4.2.1.3
dot1qVlanStaticName 1.3.6.1.2.1.17.7.1.4.3.1.1
dot1qVlanCurrentEgressPorts 1.3.6.1.2.1.17.7.1.4.2.1.4

Common 

MIB OID (name) OID (numeric)
BRIDGE-MIB dot1dBasePortIfIndex 1.3.6.1.2.1.17.1.4.1.2

 

IMPORTANT NOTE

Make sure that your device does list ALL of the OID(s) listed under the vendor specific OID(s) as well as Common ones only then the VLAN will be listed. If any of them will be missing the VLAN poller will be ignored. 
For example Juniper:
  • jnxExVlanName - 1.3.6.1.4.1.2636.3.40.1.5.1.5.1.2
  • jnxExVlanInterfaceOperStatus - 1.3.6.1.4.1.2636.3.40.1.5.1.6.1.7
  • jnxExVlanPortGroupInstance - 1.3.6.1.4.1.2636.3.40.1.5.1.5.1.4
  • jnxExVlanPortAccessMode - 1.3.6.1.4.1.2636.3.40.1.5.1.7.1.5
  • jnxExVlanTag = 1.3.6.1.4.1.2636.3.40.1.5.1.5.1.5
  • jnxExVlanPortStatus = 1.3.6.1.4.1.2636.3.40.1.5.1.7.1.3
  • dot1dBasePortIfIndex = 1.3.6.1.2.1.17.1.4.1.2

 

 

  • jlr.PNG

 

jfi.PNG

Last modified

Tags

Classifications

Public