Submit a ticketCall us

Announcing NCM 7.7
With NCM 7.7, you can examine the rules that make up an access control list for a Cisco ASA device. Then you can apply filters to display only rules that meet the specified criteria, order the rules by line number or by the hit count, and much more.
See new features and improvements.

Home > Success Center > Network Topology Mapper (NTM) > Network Topology Mapper (NTM) Documentation > NTM Administrator Guide > Specify freeform device information (IPv4, IPv6)

Specify freeform device information (IPv4, IPv6)

Table of contents
No headers

Updated: April 10, 2017

Use these steps to define hostnames and IP addresses (IPv4/IPv6). In specifying a range of devices within a subnet, you can use format that delimits addresses with a hyphen (for example, 10.0.0.10-10.0.0.42) or CIDR notation (for example, 10.0.0.0/24).

  1. Click the Free-form IPs tab and do one of the following:
    1. If you are adding individual hostnames or IP addresses, type the each one on its own line.
    2. If you are defining a range within a subnet, type each range on its own line.
    3. In specifying a range of devices within a subnet, you can use format that delimits addresses with a hyphen (for example, 10.0.0.10-10.0.0.42 or 2001:db8:0:0:0:0:0:0-2001:db8:0:ffff:ffff:ffff:ffff:ffff) or CIDR notation (for example, 10.0.0.0/24 or 2001:db8::/48).

  2. To discover these nodes, click Next.
  3. To specify other devices by IP address ranges or subnets, click IP Ranges or Subnets.
  4. To create a Do Not Scan list of devices within the ranges you have defined, click Do-Not-Scan List.
Last modified
06:35, 10 Apr 2017

Tags

Classifications

Public