Submit a ticketCall us

Putting Your Logs Where They Belong with the New SolarWinds Log Manager for Orion

The new SolarWinds® Log Manager for Orion® finally puts your log data right where it belongs, in the heart of your Orion console. Gain insight into the performance of your infrastructure by monitoring your logs in a unified console allowing you to see a wealth of information about the health and performance of your network and servers.

Reserve a Seat for Wednesday May 23rd 11am CDT | Reserve a Seat for Tuesday May 22nd 10:30am GMT | Reserve a Seat for Tuesday May 22nd 1pm SGT / 3pm AEST

Home > Success Center > Network Topology Mapper (NTM) > Network Topology Mapper (NTM) Documentation > NTM Administrator Guide > Create a do not scan list

Create a do not scan list

Table of contents
No headers

Updated: April 10, 2017

After you have defined subnets, IP address ranges, and other hostnames and IP addresses in which to discovery devices, exclude any devices (if any) from the ranges and subnets.

  1. Click the Do-Not-Scan List tab and do one of the following:
    1. If you are excluding individual hostnames or IP addresses, type the each one on its own line.
    2. If you are excluding a range within a subnet, type each range on its own line.
    3. In specifying a range of devices within a subnet, you can use format that delimits addresses with a hyphen (for example, 10.0.0.10-10.0.0.42 or 2001:db8:0:0:0:0:0:0-2001:db8:0:ffff:ffff:ffff:ffff:ffff) or CIDR notation (for example, 10.0.0.0/24 or 2001:db8::/48).

  2. When you are finished defining exclusions, click Next.
Last modified

Tags

Classifications

Public