Submit a ticketCall us

Announcing NCM 7.7
With NCM 7.7, you can examine the rules that make up an access control list for a Cisco ASA device. Then you can apply filters to display only rules that meet the specified criteria, order the rules by line number or by the hit count, and much more.
See new features and improvements.

Home > Success Center > Network Performance Monitor (NPM) > Orion SNMP Get statements

Orion SNMP Get statements

Table of contents
Created by Richard Casey, last modified by MindTouch on Jun 23, 2016

Views: 142 Votes: 1 Revisions: 3

Overview

This article discuses the commands used by the Universal Device Poller for SNMP queries.

Environment

All NPM versions

Detail

SNMP Get Type defines the SNMP polling method used by your Universal Device Poller. The polling method is determined primarily by the type of object that you want to poll. MIB values require either GET or GET NEXT, and MIB tables require GET TABLE. The SNMP get types available for Universal Device Pollers are described in the following:

  • GET  - SNMP GET is used with an OID to retrieve the value of the object with the given OID.
    For example, SNMP GET 1.3.6.1.2.1.11.1.0 retrieves the value of RFC1213-MIB:snmpInPkts (OID 1.3.6.1.2.1.11.1) for instance 0 of the polled device.
  • GET NEXT - SNMP GET NEXT is used with an OID to retrieve the value of the object with the OID immediately following the given OID.
    For example, SNMP GET NEXT 1.3.6.1.2.1.11.1.0 retrieves the value of RFC1213-MIB:snmpOutPkts (OID 1.3.6.1.2.1.11.2) for instance 0 of the polled device.
  • GET TABLE - SNMP GET TABLE is used with a MIB table OID to retrieve the table with the specified OID.
    For example, SNMP GET TABLE 1.3.6.1.2.1.4.22.0 retrieves the table of values RFC1213-MIB:ipNetToMediaTable (OID 1.3.6.1.2.1.4.22) for instance 0 of the polled device.

 

Last modified
23:18, 22 Jun 2016

Tags

Classifications

Public